8
Several things which must be ensured when installing an exhaust hood
with re-circulating system:
1. Both carbon filter and aluminum filter must be
used.
2. The position of both filters must be correct.
3. Holes where air duct is discharged found in
the front cabinet of the exhaust hood cannot
be closed.
Electricity Connection
MODENA Exhaust Hood is designed for 220 Volt electricity input,
single phase with 50 Hz of frequency. This appliance uses a double-
insulated power cord (2 parallel cords) and should not be connected
to a grounding wire.
To Next Page
Loading...
