To Next PageTo Next Page
Need help?Do you have a question about the MODENO Nantucket and is the answer not in the manual?
General| Brand | MODENO |
|---|---|
| Model | Nantucket |
| Category | Outdoor Fireplace |
| Language | English |
Advice for installers and consumers on retaining the manual for future reference.
Warnings about fire, explosion, and personal injury if manual instructions are not followed.
Immediate actions to take if a gas leak is detected, including shutting off supply and evacuating.
Mandates outdoor use only and professional installation for safety and compliance.
Comprehensive steps for responding to a natural gas leak, emphasizing immediate actions and contacting authorities.
Stresses professional installation, adherence to codes, and regular inspections for safe operation.
Specifies minimum clearances, gas pressure limits, and suitable surface types for safe installation and operation.
Lists forbidden uses like indoor heating, unattended operation, and usage in unsafe locations or conditions.
Covers safe practices regarding clothing, electrical cords, hot surfaces, moving, and operating the unit.
Provides essential rules for safe use, such as not sitting on the unit or throwing items into the flame.
Outlines regular cleaning of components and inspection of hoses for wear before each use.
Details natural gas properties, handling dangers, and warnings against propane conversion.
Guidance on installing gas supply lines, including pressure checks, shut-off valves, and pipe sealing compounds.
Prohibits storing gasoline or other volatile substances in the vicinity of the fire table.
Instructions for connecting the natural gas supply, including valve installation and proper pipe sealing.
Specific safety instructions and warnings related to pressure testing the gas supply piping system.
Stern warning against attempting to convert or change factory-set burner valves for natural gas.
A comprehensive list of all included parts with item numbers, descriptions, and quantities.
Provides contact details for Ocean Rock USA for technical assistance or replacement parts.
Step-by-step guide for installing the AAA battery required for the igniter system.
Instructions on correctly positioning lava rocks to ensure proper burner function and ignition without clogging.
Details on connecting the fire table to the house natural gas piping, emphasizing outdoor connection points.
Instructions for properly coating and securely attaching the quick disconnect socket to the gas supply pipe.
Step-by-step guide on how to connect and lock the gas hose into the quick disconnect socket.
Reminds the user to perform a leak test after all connections are made, as detailed elsewhere in the manual.
Essential checks of hoses, valves, and burner connections for safety and proper function before use.
A detailed guide for creating a leak detection solution and testing all gas connections for leaks.
Step-by-step instructions for lighting the fire table using its integrated ignitor.
Procedures for lighting with a match or lighter, including necessary precautions and warnings.
Instructions for safely turning off the fire table, including knob operation and gas supply disconnection.
Emphasizes inspecting the unit before use and warns against tampering with the appliance.
Provides instructions for cleaning various surfaces and general care to extend product life.
Guidelines for safely storing the fire table when not in use, ensuring it is cool and protected.
Checks if the electrode wires are correctly inserted into the igniter box for proper sparking.
Ensures the pilot housing is clear of debris for correct ignition and burner operation.
Details the correct positioning of the igniter pin and thermocouple relative to the burner tube.
Verifies that the thermocouple wire is correctly aligned with the valve for proper function.
Addresses common causes for the burner not lighting via igniter or match, offering troubleshooting steps.
Explains potential causes for excessive black smoke and provides methods for resolution.
Provides solutions for problems causing a sudden drop in gas flow or reduced flame height.
Addresses irregular flame patterns and flame blowouts, offering corrective actions.
Details the warranty period, what is covered, and common exclusions like damage from misuse.
Outlines limitations on damages and conditions that can void the warranty, such as improper installation or alterations.
