To Next PageTo Next Page
Need help?Do you have a question about the MODENO Venice and is the answer not in the manual?
General| Brand | MODENO |
|---|---|
| Model | Venice |
| Category | Outdoor Fireplace |
| Language | English |
Specifies that the fire table is for outdoor use only and prohibits indoor operation.
Provides immediate steps to take if you smell gas to prevent fire or explosion.
Emphasizes reading the manual and following installation instructions for safety.
Lists items to avoid during operation, such as flammable materials, wind, and unattended use.
States the fire table is for liquid propane (LP) gas only and warns against conversion.
Details the properties of LP gas, such as flammability and odor.
Provides crucial warnings regarding LP cylinder storage, condition, and usage.
Covers proper connection of the LP tank, valve operation, and safety checks.
Explains the magnetic flow limiting device and connection safety feature.
Details inspection procedures for the hose and regulator for signs of damage.
Guides on hand-tightening connections, avoiding cross-threading, and performing leak tests.
Lists the main fire table unit, regulator, hose, and lava rock included in the package.
Instructions for installing a AAA battery, noting it is not included.
Details on placing and securing a 20 lb propane tank using the tank seat.
Step-by-step guide for connecting and disconnecting the propane tank safely.
Instructions for positioning lava rock and adjusting feet for stability and proper burner function.
Ensures secure fastening of regulator valve and hose connections to burner and tank.
Detailed steps for performing a leak check using soap solution on gas connections.
Steps for lighting the fire table using the integrated igniter button.
Alternative method for lighting using a long match or butane lighter with safety precautions.
Regular inspection of burner, air mixer, and connections to ensure safety.
Guidance on cleaning exterior surfaces, including stainless steel, with appropriate solutions.
Instructions for safely turning off gas, removing the tank, and storing the fire table.
Ensures the electrode wire is correctly inserted into the igniter box for proper sparking.
Verifies the pilot housing is unobstructed and free from debris around the igniter pin.
Confirms correct placement of the igniter pin and thermocouple relative to the burner tube.
Ensures the thermocouple wire is correctly positioned and aligned with the valve.
Addresses issues like wet components, dead battery, or faulty igniter pin.
Covers problems related to gas flow, connections, hose obstructions, or clogged burner ports.
Identifies potential causes for black smoke, such as a pinched hose or obstructed burner ports.
Diagnoses issues like an empty tank or activated excess flow safety device.
Addresses problems with clogged or blocked burner ports causing uneven flames.
Explains causes for flame blow out, such as high winds or low LP gas levels.
Discusses ice buildup on the LP tank affecting vaporization in temperatures below 50°F.
Details the 1-year warranty for defects in parts and workmanship under normal use.
Lists conditions not covered by warranty, such as shipping damage, abuse, and cosmetic flaws.
States that improper installation or modifications by unauthorized persons void the warranty.
