Modern Flames Pro Series - User Manual

Pro Series Remote
Power
Heat
Cycle between
High-Low-Off
Fade
Cycle between
all colors
Sync
All zones sync
to flame color
Color
Select zone then use
dial to pick color
Reset
All zones reset
to default setting
Flame
Select zone then use
wheel or bar
Ember Bed
Select zone then use
wheel or bar
Downlight
Select zone then
use wheel or bar
3 Zones
Intensity
Select zone then slide bar to pick any intensity

Summary

Pro Series Remote Functions

Power

Controls the power state of the fireplace.

Color Selection

Allows zone selection and color adjustment via dial.

Heat Control

Cycles through High, Low, and Off heat settings.

Fade Effect

Cycles through all available color effects.

Sync Flame Color

Synchronizes all zones to the current flame color.

Reset Remote

Resets all zones to their default settings.

Flame Control

Select a zone and adjust flame using wheel or bar.

Ember Bed Control

Select a zone and adjust ember bed using wheel or bar.

Downlight Control

Select a zone and adjust downlight using wheel or bar.

Intensity Control

Select a zone and adjust intensity via slide bar.

Pairing the Hand Held Remote

Pairing Procedure

Steps to pair the remote to the fireplace, including timing.

Clearing Paired Remotes

Procedure to reset and clear existing remote pairings.

Modern Flames Pro Series Specifications