Modern Forms Nautilus - Finishing the Installation; Installing the Luminaire Module

FR-W1818
Nautilus Instructions20
7. Finishing the Installation
1. Secure wire connectors with supplied wire ties.
2. Install canopy to mounting bracket with the screw
removed in section 4 (Fig. 7).
3. Install canopy screw ring as shown.
8. Installing the Luminaire Module
1. Remove 1 of 3 screws and loosen the others (Do Not Remove) (Fig. 8).
2. Using the screw from the previous step, install the adapter plate.
3. Attach LED wires from motor assembly to luminaire module. White to
white from LED module and blue from fan to black from LED module
(Fig. 8).
4. Secure the luminaire module with the 3 screws to the
adapter plate (Fig. 8).
5. Install glass shade without over-tightening (Fig. 8A).