Modern Forms Roboto 52 - Page 23

FR-W1910
Roboto Instructions 23
Fan On/Off: Press and hold button for 4 seconds. The LED on the remote will flash
green and all connected fans will beep to indicate the message has been received. All
fans will turn off. This will bring all fans controlled by the remote into sync.
Light On/Off: Press and hold button for 4 seconds. The LED on the remote will
flash
green and all connected fans will beep to indicate the message has been received. All
lights will turn off. This will bring all fans controlled by the remote into sync.
Fan Direction: Press and hold button for 4 seconds. The LED on the remote will
flash green and all connected fans will beep to indicate the message has been
received. All fans will be set to summer mode (CCW rotation). This will bring all fans
controlled by the remote into sync.
A
B
C
Air-Gap
Switch*
Wall Control
* Air-Gap Switch only included
with wall control
Remote
Control
9
9A
Summer Mode
(Counter-Clockwise)
Winter Mode
(Clockwise)
Fan On/Off
Press and hold
button for 4 seconds.
Light On/Off
Press and hold
button for 4 seconds.
Fan Direction
Press and hold
button for 4 seconds.
9B
A
B
C