Modern Forms Wynd 42 - Installing the Mounting Bracket; Attaching the Fan Blade

FR-W1801
Wynd Instructions12
2. Installing the Mounting Bracket
CAUTION: Remember to disconnect the power at the circuit breaker.
1. Remove 1 set screw from mounting bracket and set aside for use in
Finishing the Installation.
2. Pass supply wires through mounting bracket and secure to outlet
box. Verify supply wire colors and designations (Fig. 2A).
3. Secure the mounting bracket to the ceiling outlet box with the
screws and washers provided in the hardware bag. Use A hardware.
1. Place blade on motor and secure with the blade attachment,
screws and washers.
2. Insert blades in slots, aligning with motor assembly holes.
3. Secure blades with blade attachment screws & washers.
Use B hardware.
3. Attaching the Fan Blade