Need help?Do you have a question about the Modern Forms Zephyr 62 and is the answer not in the manual?
General| Type | Ceiling Fan |
|---|---|
| Blade Span | 62 inches |
| Motor Type | DC Motor |
| Number of Blades | 3 |
| Control | Remote Control |
| Location Usage | Indoor/Outdoor |
| Dimmable | Yes |
| Light Type | LED |
| Speed Settings | 6 |
| Reversible Motor | Yes |
| Light Kit | Included |
| Energy Efficiency | Energy Star Rated |
| Blade Color | White |
| Mounting Type | Downrod |
| Warranty | Lifetime |
Provides phone number and email for fast service and lists required information.
Ensure power is off, follow electrical codes, and use a licensed electrician for installation.
Maintain minimum clearance from floor and walls, avoid placing objects in blade path.
Use dry or lightly dampened cloth for cleaning; avoid water or chemicals to prevent shock or damage.
All set screws must be checked and re-tightened where necessary before installation.
Do not install/use damaged parts, avoid power tools, foreign objects, and unsupervised use by children.
Outlet box and support structure must securely support 35 lbs (15.9 kg) and use UL/cUL listed boxes.
Refer to electrical connections section; use a licensed electrician for wiring knowledge.
Always switch off power at the circuit breaker before servicing or cleaning the fan.
Seamlessly integrates with smart devices like Alexa, Google Assistant, and SmartThings.
Wet Location-listed, Wi-Fi and Bluetooth enabled, and efficient DC motor.
Lists Bluetooth Remote Control and Bluetooth Wall Control with specifications.
Includes blade set, motor assembly, blade collector ring, and coupling cover.
Contains hanger assembly, adapter plate, canopy, and canopy ring.
Includes LED module, control receiver with hardware, and glass shade.
Details screws, washers, and wire connectors provided in the hardware bag.
Specifies the included Bluetooth Remote Control (F-RCBT-WT) in White.
Secure outlet box to building structure using appropriate fasteners; use UL/cUL listed boxes.
An installation hanger bar may be needed if there is no ceiling joist for existing fixtures.
Downrod fans can be suspended up to 72" using additional downrods and 80" lead wire.
A sloped ceiling kit is required for slopes up to 45°, accommodating steeper ceilings.
Steps to disconnect power, remove/loosen screws, pass wires, and secure the bracket to the outlet box.
Attach blades with screws and rubber washers; install the blade collector ring with screws.
Remove mounting plate screws, align key holes, turn adapter plate to lock, and tighten screws.
Remove hanger ball, cross pin, and thread downrod into collar after feeding wires.
Align downrod and collar holes, insert cotter and clevis pins, and tighten collar screws.
Failure to install cotter pin or tighten screws may result in fan loosening or falling.
Slip coupling cover and canopy onto downrod, ensuring correct orientation and seating.
Lift motor assembly and seat hanger ball in mounting bracket socket, ensuring tab alignment.
Secure the safety cable into structure beams using wood screw, washers, and spring washers.
Notes mandatory safety cable for installations in Canada and for certain fan types in the US.
Requires three-conductor cable; check all connections are tight and no bare wires are visible.
Connect fan wires (red, grey, yellow, white, blue) to corresponding receiver terminals.
Connect black (hot) and white (neutral) ceiling wires to receiver's "AC in L" and "AC in N".
Connect ground wires to the outlet box ground wire; failure can affect fan control.
Connect green to ground, black to line in, red to fan, and white to neutral from wall outlet box.
Tuck wire connections inside the outlet box and secure the wall control with provided screws.
Attach the wall mounting plate over the wall switch and fasten the wall plate to it.
Use wire ties to secure connections and tuck them neatly into the ceiling outlet box.
Slide canopy onto hanger bracket, align key holes, turn to lock, and secure with screws.
Ensure hanger bracket tab is seated in hanger ball groove before attaching canopy to prevent wiring damage.
Remove screws, connect luminaire wires to fan wires, and secure module to adapter plate.
Raise glass shade against the luminaire module and tighten clockwise until snug.
Instructions for installing and tightening the optional metal light cover.
Describes light control (on/off, dimming) and fan control (on/off, speed, season).
The pull tab on the air-gap switch powers off the fan in emergencies.
Fan beeps twice at minimum/maximum speed, and indicates speed changes with a tone.
Control multiple fans with one remote/wall control, and details on pairing process.
Reset fan to factory settings via figures or the Modern Forms app.
Mimics natural wind by varying speed; activated/deactivated by pressing specific buttons for 4 seconds.
Control fan via app, set up Wi-Fi, name device, create schedules, and use smart features.
Integrates with Amazon Alexa, Google Assistant, Samsung SmartThings, and Control 4.
Dims light to 1%, offers ON/OFF and 6 fan speeds; sold separately.
Dims light to 1%, offers ON/OFF and 6 fan speeds; model F-RCBT-WT in White.
Designed for steeper sloped ceilings up to 45° or 12/12 pitch.
Connects two downrods together.
Lists various downrod lengths from 12" to 72" (e.g., XF-12, XF-72).
Check circuit fuses/breakers and line wire connections; ensure power is off before checking.
Allow break-in period, check screws, ensure light cover/glass is snug, and outlet box is secured.
Tighten set screws, ensure hanger ball is locked, check bracket screws, and align blades.
Consider using a longer downrod if the fan is not producing enough air movement.
Verify power, power cycle the fan, and re-pair the remote or wall control.
Steps to enable Wi-Fi on the fan and connect to available networks.
Troubleshoot home Wi-Fi network visibility in the app, checking compatibility and SSID.
Ensure correct Wi-Fi password and mobile device network connection; check router range.
Definition of power cycling and methods to perform it for troubleshooting.
Learn user habits to recommend schedules; can be toggled on or off via the app.
Mimics natural wind by fluctuating fan speed for a natural effect.
Process of connecting remote or wall control to the fan, noting pre-paired status.
Restores original settings, disconnects Wi-Fi, and requires re-pairing controls.
Outlines warranty periods for finishes, LED modules, DC motors, and stainless steel finishes.
Excludes consequential damages, labor costs, altered/mishandled products, and third-party components.
Notes on normal wear, fading, chalking, and coastal corrosion as not covered.
Modern Forms obligation is limited to repair/replacement; written defect notice required within 5 years.
Warranty applies only to products purchased from authorized Modern Forms distributors.
Mentions warranty information provided in Spanish and French for the smart fan.
To Next Page