EasyManua.ls Logo

Modine Manufacturing HDB Installation Instructions

Modine Manufacturing HDB
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
6-574.2
5H081079A
Sept, 2015
INSTALLATION INSTRUCTIONS
two-point mounting kit
models HD/HDS (100 & 125 only), PTC, PTS, PTP, PDP (350 &400)
Two-Point Mounted Unit Heater
WARNING
Gas supply shall be shut-off and the electrical power
disconnected before proceeding with the conversion.
Failure to do so could result in fire, explosion, electrical
shock, or the unit starting suddenly resulting in injury.
2-POINT MOUNTING KIT
Model Application
On occasion, building structures may not easily accommodate
the standard four-point unit suspension on HD/HDS (100 &
125 only), PTC (85-310 only), PTS, PTP, PDP (350 &400)
models. For those cases, Modine offers a two-point mounting
conversion kit, which can be used to convert the unit to two-
point suspension. The conversion kit includes two heavy
gauge "C" channel brackets and two angle brackets, along
with required fasteners to attach the brackets to the heater.
To ensure adequate suspension of the unit is achieved, follow
these instructions in detail. For complete unit installation
instructions, please refer to the latest revision of the
Installation & Service Manual that shipped with the unit.
These are summarized in Table 1.1.
Figure 2.2 Angle Bracket Installation
Model
Installation & Service
Manual
HD 100 & 125 6-583
HDS 100 & 125 6-584
PTC (85310) 6-563
PTS, 6-561
PDP 350 & 400 6-580
PTP 6-560
As shipped with the unit, or latest revision.
Detailed instructions for the assembly/installation of
the two-point mounting kit are on the reverse side of
this sheet.
IMPORTANT
1. The use of this manual is specifically intended for a
qualified installation and service agency. All installation
and service of these kits must be performed by a
qualified installation and service agency.
2. These instructions must also be used in conjunction
with the Installation and Service (I&S) Manual originally
shipped with the appliance being converted, in addition
to any other accompanying component supplier
literature.
THIS MANUAL IS THE PROPERTY OF THE OWNER.
PLEASE BE SURE TO LEAVE IT WITH THE OWNER WHEN YOU LEAVE THE JOB.

Other manuals for Modine Manufacturing HDB

Question and Answer IconNeed help?

Do you have a question about the Modine Manufacturing HDB and is the answer not in the manual?

Modine Manufacturing HDB Specifications

General IconGeneral
ModelHDB
Fuel TypeNatural Gas or Propane
Input Range30, 000 - 400, 000 BTU/hr
MountingHorizontal or Vertical
Ignition TypeDirect Spark Ignition
VentilationPower Vented
Efficiency80%
Voltage115V
ApplicationsCommercial, Industrial

Related product manuals