The room thermostat controls, directly or via a connection unit,
thermal actuators connected in a room-by-room temperature con-
trol system. It is suitable for 24V or 230V components, depending
on the variant. The unit serves for
• a fixed installation,
• the registration of the actual temperature (room temperature),
• the setting of the target temperature (comfort temperature)
• the control of the actual temperature by activating actuators
in heating operation (Standard) or heating/cooling operation
(Comfort, Control) in an assigned zone,
• the connection of an external sensor (Control).
Every other use, modification and conversion is expressively forbid-
den and leads to dangers the manufacturer cannot be held liable
for.
All safety notes in these instructions must be observed in order to
avoid accidents with personal damage or property damage.
• Only an authorised electrician may open the device. It may only
be opened in de-energised state.
• Always disconnect from the mains network and secure against
unintended activation before opening.
• Only use the device if it is in flawless state.
• Observe the performance limits of the device and the environ-
mental conditions.
• This device is not intended to be used by persons (including
children) with restricted physical, sensory or mental skills or who
lack experience or knowledge. If necessary, these persons must
2 Safety
2.1 Intended use
2.2 General safety notes
To Next Page
Loading...
