Moeller PS 4-300 Series User Manual

Hardware and Engineering
PS 4-300
04/99 AWB 2700-1311 GB
1st published 1999, edition 07/99
© Moeller GmbH, Bonn
Author: Werner Albrecht
Editor: Thomas Kracht
Translators: Baker & Harrison, Terence Osborn
H1311U1g.fm Seite 1 Freitag, 4. Juni 1999 1:20 13

Moeller PS 4-300 Series Specifications

General

Brand	Moeller
Model	PS 4-300 Series
Category	Controller
Language	English

Summary

Before commencing the installation

1 About The PS 4-300 Compact PLC

Hardware and software requirements

PC and software needed for PS 4-300 programming and operation.

Features

Key characteristics and capabilities of the PS 4-300 PLC.

Setup

Instructions and guidance on setting up the PS 4-300 PLC.

Features of the PS 4-300

Detailed breakdown of the PS 4-300's features and components.

2 Engineering

Connections

Information on how to connect various cables and interfaces.

Programming device interface

Details on the interface for connecting a programming device.

Suconet K connector

Information about the Suconet K network interface.

Connecting to the Suconet K field bus

Steps for connecting the PLC to the Suconet K field bus.

Power supply

Details on power supply requirements and connections.

3 Mounting

Mounting on top-hat rail

Instructions for mounting the PLC module on a standard top-hat rail.

Mounting on fixing feet

Procedures for mounting the PLC using its fixing feet.

4 Topology Configuration

Configuring stations

Steps and principles for configuring network stations (master/slave).

Setting PS 4-300 parameters

How to configure specific parameters for the PS 4-300.

5 Slave Addressing

6 Operation

Power-up behaviour

Operating states of the PLC

Start-up behaviour

Transferring programs

7 Test/Commissioning/Diagnostics

Status LEDs

Diagnostics