81
04/99 AWB 2700-1311 GB
Appendix
Accessories
Designation Type Description/application
Programming cable ZB 4-303 KB1 Adapter for programming the PS 4-300 from a PC
Memory module ZB 4-901-SF1 1 MB flash memory module for use as a user program backup
and recipe memory
ZB 4-128-SF1 128 KB flash memory (recipe memory)
Screw terminal ZB 4-110-KL1 Screw terminal for the input/output level
Twin-level terminal
block
ZB 4-122-KL1 Twin-level terminal block for distributing potential, e.g. for
connecting 3-pole proximity switches to a PLC or local
expansion module.
Hinged cover ZB 4-101-GZ1 Hinged cover for labelling the inputs and outputs
(PS 4, EM 4, LE 4)
Fixing foot (bracket) ZB 4-101-GF1 Foot for screwing the PS 4 onto a mounting plate
Back-up battery ZB 4-600-BT1 Battery for backing up the PS 4-300’s RAM.
Simulator ZB 4-108-ES1 Digital input simulator
Data cable KPG 1-PS3 Cable between the PS 4-300 and slave; length: 0.5 m
T connector TBA 3.1 For connecting a station to the Suconet K/K1 line
Data plug connector S 1-PS3 5-pole DIN connector for RS 485 interface of the
PS 4-201-MM1
Cable LT 309.096 Cable, 2 × 0.5 mm
2
, screened and twisted for making up
Suconet K cables
Screen grounding kit ZB 4-102-KS1 Screen grounding kit for Suconet
Snap-on mounting for
the top-hat rail
FM4/TS35 Manufactured by Weidmüller, order number 068790
Clip for snap-on
mounting
KLBü3-8SC Manufactured by Weidmüller, order number 169226
H1311g.bk Seite 81 Freitag, 4. Juni 1999 1:12 13
To Next Page
Loading...
