Setting PS 4-300
parameters
43
04/99 AWB 2700-1311 GB
General settings
왘 Open ‹Edit ➞ Parameters ➞ General Settings›.
Bus Status:
왘 Enter whether the PLC is to run as “Suconet K
master”, “Suconet K slave” or in “Transparent
mode” in the appropriate dialog box (see
following sections).
Operating Mode:
왘 Set whether data exchange is to be carried out
via the Suconet K interface synchronously or
asynchronously to the user program cycle.
H1311g.bk Seite 43 Freitag, 4. Juni 1999 1:12 13
To Next Page
Loading...
