Moen 3-Function Showerhead 3233 User Manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
3-1/2”
(89mm)
4”
(104mm)
Rev. 3/10
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Available finishes identified by suffix
• Nonmetallic spray face and shell
• Brass swivel ball assembly
OPERATION
• 3 functions: massage, full and combined
• Rotate outer ring to select
FLOW
• Designed to deliver 1.75 gpm (6.65 L/min) max at 80 psi
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Envi™ Eco-Performance
3-Function Showerhead
Models: 3233 series

Moen 3-Function Showerhead 3233 Specifications

General

Type	Showerhead
Functions	3
Model Number	3233
Flow Rate	2.5 GPM
Finish	Chrome
Diameter	4 inches
Material	Metal
Installation Type	Wall Mount
Spray Settings	Massage
Dimensions	4 x 4 x 4 inches
Spray Patterns	Massage

Summary

Moen Showerhead Specifications

Product Description

Details on available finishes, nonmetallic construction, and brass swivel ball assembly.

Operation Modes

Information on the showerhead's 3 functions: massage, full, and combined, and how to select them.

Flow Rate

Specifies the maximum flow rate of 1.75 gpm (6.65 L/min) at 80 psi.

Certifications and Standards

Lists third-party certifications like WaterSense, ASME, and CSA standards.

Warranty Information

Details the lifetime limited warranty for leaks, drips, and finish, and a 5-year commercial warranty.

Critical Dimensions

Provides key physical measurements: 3-1/2" (89mm) height and 4" (104mm) width.