EasyManua.ls Logo

Moen 3301 User Manual

Moen 3301
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IMPORTANT INSTRUCTIONS TO THE INSTALLER:
PLEASE READ THESE INSTRUCTIONS, FILL IN THE BLANKS
BELOW, THEN PROVIDE THE INSTRUCTIONS TO THE USER BY
SECURELY TAPING THEM TO THE VALVE.
WARNING: Risk of scalding
Varying the calibration of this thermostatic valve to increase water
temperature increases the risk of injury from scalding. The installer is
responsible for installing the valve and any recalibration of the water
temperature in accordance with the instructions.
CAUTION: Danger of scald injury. Valve can be recalibrated to
provide higher temperature water.
This valve has been preset at the factory to provide a range of water temperatures.
Any change in settings or water inlet conditions from those used during calibration
at the factory may raise the outlet temperature and may cause scalding. The
responsibility for the proper installation and any recalibration of this valve lies with
the installer.
TWO HANDLE THERMOSTATIC TUB/SHOWER VALVE
Models 3301, 3321
MEZCLADORA TERMOSTÁTICA DE DOS MANIJAS
PARA BAÑERA/DUCHA
Modelos 3301, 3321
SOUPAPE DE DOUCHE/BAIGNOIRE
THERMOSTATIQUE À DEUX POIGNÉES
Modéles 3301, 3321
ENGLISH
INS249
THIS THERMOSTATIC VALVE HAS BEEN PRESET
BY
OF
TO A MAXIMUM WATER DISCHARGE TEMPERATURE OF ______ºF. ANY
CHANGE TO THIS SETTING MAY RAISE THE DISCHARGE TEMPERATURE
AND COULD CAUSE SCALDING.
DATE:__________
!
Complies with: ASME A112.18.1M, CSA B125, & ASSE 1016

Questions and Answers:

Moen 3301 Specifications

General IconGeneral
BrandMoen
Model3301
CategoryPlumbing Product
LanguageEnglish

Summary

Important Installation Instructions

Scalding Hazard Warning

Warns about the risk of scalding due to improper calibration or temperature settings.

Helpful Tools and Dimensions

Recommended Tools for Installation

Lists essential tools required for safe and easy faucet installation.

Parts Diagram and Identification

Component Breakdown

Visual identification of all parts with corresponding numbers and names in multiple languages.

Installation Procedures

Cutting the Hole for Installation

Step-by-step guide for cutting wall openings for thick and thin wall installations.

Mounting Bracket Attachment

Instructions for attaching the metal mounting bracket to the valve body.

Valve Operation and Flushing

Flushing Procedure

Steps to flush the valve and supply lines after installation to remove debris.

Maintenance and Recalibration

Recalibration Procedure

Guide to adjust the thermostatic valve's temperature range for desired settings.

Check Valve Replacement

Instructions for replacing the check valve cartridge if it becomes defective.

Troubleshooting Guide

Common Problems and Solutions

Addresses issues like incorrect temperature, low flow, or no flow with potential causes and remedies.

Component Servicing and Protection

Thermostatic Cartridge Servicing

Detailed steps for removing, cleaning, and replacing the thermostatic cartridge.

Flow Control Valve Cartridge Replacement

Procedure for replacing the flow control cartridge and extension.

Protection Against Freezing

Steps for winterizing the valve to prevent damage from freezing temperatures.

Warranty and Consumer Information

Limited Lifetime Warranty

Details Moen's warranty coverage for the faucet, including exclusions and claim procedures.

Lead Information and Helpline

Provides information on lead content and contact details for customer support.

Related product manuals