Moen 6100 Series Specifications

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
LEVEL™
Single-Handle Lavatory Faucet
Models: 6100 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 1 HOLE, 1-1/4” MIN. DIA.
Lift
Rod
2-1/2"
(80mm)
MAX.
OPTIONAL ESCUTCHEON
(150mm) X (60mm)
(150mm)
83.383.3
ÿ8
2
ÿ
2
8
248.4248.4
3.5885.
3
3-15/16"
7-3/4"
2-5/16"
7-1/8"
1-1/8"
1/4"
(7mm)
5-7/8"
5-7/8"
3-1/4"
1/2"
(181mm)
(83mm)
(14mm)
(28mm)
(60mm)
(101mm)
(197mm)
58°
1-5/8"
(41mm)
2"
(51mm)
2-3/8"
28-3/4"
(730mm)
3/8" (11mm)
COMPRESSION
FITTINGS
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supply lines with 3/8” compression fittings
• Includes metal pop-up waste assembly
• Includes optional 3 hole deck plate (escutcheon)
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and ceramic material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 3/11
There is more than 1 version of this model.
Page down to identify the version you have.

Moen 6100 Series Specifications

General

Brand	Moen
Model	6100 Series
Category	Plumbing Product
Language	English