Moen 7622SRS - Mounting Faucet Body; Installing Mounting Washer; Tightening Mounting Nut

4
22
33
1. Slide Mounting Washer (E) up onto Faucet Body (A) under sink.
2. Install Mounting Nut (F).
1. Hand tighten Mounting Nut (F) with Installation Tool (D).
2. Use screwdriver though hole in Installation Tool (D)
to tighten firmly.
1
2
2
1
E
F
A
F
D
D
1. Slide Mounting Washer (E) up onto Faucet Body (A) under sink.
2. Install Mounting Nut (F).
1. Slide Mounting Washer (E) up onto Faucet Body (A) under sink.
2. Install Mounting Nut (F).
1. Hand tighten Mounting Nut (F) with Installation Tool (D).
2. Use screwdriver though hole in Installation Tool (D)
to tighten firmly.
1. hand tighten Mounting Nut (F) with Installation Tool (D).
2. Use screwdriver though hole in Installation Tool (D)
to tighten firmly.