To Next PageTo Next Page
Need help?Do you have a question about the Moen 9265 and is the answer not in the manual?
General| Model Number | 9265 |
|---|---|
| Material | Metal |
| Finish | Chrome |
| Flow Rate | 1.2 gpm |
| Handle Type | Lever |
| Valve Included | Yes |
| ADA Compliant | Yes |
| WaterSense Certified | Yes |
| Lifetime Limited Warranty | Yes |
| Type | Faucet |
Identifies the specific bidet valve model for installation.
Offers support for installation, missing, or replacement parts.
Lists tools recommended by Moen for safe and easy faucet replacement.
Essential safety warnings before removing the old faucet.
Explains the meaning of visual symbols used throughout the installation guide.
Details all parts included in the bidet valve kit for reference.
Attaches the main diverter valve to the bidet.
Installs gaskets, washers, and nuts from below the bidet.
Attaches the spray nozzle and associated gaskets.
Installs the hot and cold valve bodies with washers and nuts.
Connects the diverter hose to the spray nozzle shank.
Connects the diverter hose to the diverter valve connection.
Attaches the hot and cold valve bodies through the bidet and top washers.
Hand-tightens the hex nuts for the valve bodies.
Connects diverter hose to hot and cold valve bodies.
Secures valve bodies using adjustable wrenches.
Confirms valve stems are in the 'off' or closed position.
Applies thread seal tape and installs tailpiece into drain body.
Inserts and secures the drain body from below the bidet.
Installs the waste assembly cap into the drain body opening.
Loosens and removes the pivot rod nut for re-installation.
Installs the pivot rod seat and the pivot rod.
Re-installs and tightens the pivot rod nut.
Details Moen's warranty terms for faucet products.
