L N
2. With 4 Gang 2 Way switches
3. With Wall Socket(4 sockets available)
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
APP
Schedule timer Voice control-work
with Google Home
Voice control-work
with Amazon Alexa
Device Sharing
App
APP
Router Reset switches
Reset switches
(Note:Chosen from App as rocker switch default)
Inhouse local operation
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with local regulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
FAQ
1.Turn off the power supply before carrying out any
electrical installation work.
2. Connect wires according to the wiring diagram.
3. Insert the module into the junction box.
4. Connect the power supply and follow switch module
configuration instructions.
Note: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your mobile and switch module
are under the same 2.4 GHz WiFi network.
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this WiFi switch
module?
Q3: What happens if the WiFi goes off?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
And only rocker light switch,touch switch and socket can
be connected to the switch module.
You can still control the device connected the switch
module with your traditional switch and once WiFi is
active again the device connected to module will
connect automatically to your WiFi network.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect our WiFi switch module to the
new WiFi network according
t to he App User Manual.
Q
5: How do I reset the device?
Press the rocker light switch ON/OFF cycle for 5 times
until the beeper on the module sounds continuously.
(Confirm your light is on to operate)
Product type
Wireless protocol
Wi-Fi 2.4GHz
Operation temp. -10ºC - +40ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤ 200 m
Dims (WxDxH) 52x47x22.5 mm
IP rating IP20
Voltage 90-250V AC 50/60Hz
Max current Total 10A
WIRING DIAGRAM
L N
4 sockets
1 2 3 4
5 6 7 8
Rocker switches
52 mm
22.5 mm
47 mm
S1
S2
S3
S4
L2
L3
L4
L1
L
N
1. With one 4 Gang switch
L N
MS-104D
Smart Switch Module
Instruction Manual
WiFi 4 Gang
Enjoy Our Smart Life
3 Gang 2 Way
Rocker switchesVoice control
4 Gang Smart Switch Module
Remove the old switch
Turn off the circuit breaker and use the electrical tester to
test the power.
Ensure the switch is off before wiring.
Step 1
Step 2
Step 3
Remove the switch and pull it away from the wall.
ldentify Line/Load Wire(Note:The color of your wire
may be different from the color shown on the
manual.)
We recommend you remove the faceplate from the old switch and
use an electrical
tester to test all wires connected to the switch to ensure there is no
voltage in the circuit.
You may need to turn off more than one circuit breaker.
Verify power is off
Line
English
EnglishEnglish English
EnglishEnglish EnglishEnglish
To Next Page
Need help?
General
