What to do if my Moes Thermostat says battery output is too low?
- TtfischerAug 8, 2025
If the Moes Thermostat displays a message indicating that the battery output is too low, you should replace the batteries.
What to do if my Moes Thermostat says battery output is too low?
If the Moes Thermostat displays a message indicating that the battery output is too low, you should replace the batteries.
How to fix actuating range too wide on Moes Thermostat?
If the actuating range of your Moes Thermostat is too wide, make sure the radiator thermostat is properly fastened.
Detailed diagram and explanation of the thermostat's display, indicators, and buttons.
Step-by-step guide to inserting or replacing the device's batteries.
Instructions to set the year, month, day, hour, and minute using buttons.
Easy installation without draining water or switching off heating, fits M30x1.5 valves.
How to screw the thermostat directly onto M30x1.5 valves, adjust angle, and check for active status.
Instructions for installing the adapter on Danfoss RAVL valves, aligning planes A and B.
Steps to install the adapter on Danfoss RAV valves, aligning planes A and B with notches.
Instructions for installing the adapter on Danfoss RA valves, including "N" Align Dial.
Selecting and installing the ejector rod for M28x1.5 valves based on manufacturer and size.
Installing the adapter onto Giacomini valves and inserting the GIA ejector rod.
Opening the valve flow to maximum before installing the adapter on Caleffi valves.
Handling situations like F2 error or valve not closing by using 1.6mm or 2.6mm ejector rods.
Explanation of the LCD screen layout and what it indicates when ready for configuration.
Details about installing the MOES App or Tuya Smart/Smart Life App for device control.
Creating heating profiles with up to ten temperature stages per day.
Table explaining error codes (F1, F2, F3), problems, and solutions.
| Brand | Moes |
|---|---|
| Model | TV01 |
| Category | Control Unit |
| Language | English |