The radiator thermostat is easy to install and can
be done without draining heating water or
intervening in the heating system. No special tools
are required, nor does the heating have to be
switched off.
The ring nut attached to the radiator thermostat
can be used universally and without accessories for
all valves with a thread size of M30×1.5 from the
most popular manufacturers such as.
By means of the adapters in the delivery, the device
can be installed on radiator valves of type Danfoss
RA, Danfoss RAV and Danfoss RAVL.
•Danfoss •Heimeier •MNG •Junkers
•Landis&Gyr(Duodyr) •Honeywell-Braukmann
•Oventrop • Schlösser •Comap •Valf Sanayi
•Mertik Maxitrol •Watts •Wingenroth(Wiroflex)
•R.B.M •Tiemme •Jaga •Siemens •ldmar54
5. Installation of the radiator
thermostat
5.1 Unscrew your existing radiator thermostat
No worries, water will not leak during this process.
5
To Next Page
Loading...
