Moes TV01 - M30 x1.5 Valve Installation; Mounting on M30 x1.5 Valves

5.2 M30×1.5
•Screw the TV01 smart radiator thermostat
directly onto the radiator if the connector type is
M30x 1.5(picture shown as below). You can adjust
the angle to make the screen facing the viewer
properly.
•Rotate the thermostat dial to the maximum value,
themaxvaluemaybe6or8.
•Check the is active.
•Install the device.
6
1.5mm
30mm
M30 × 1.5