Why is the Power/Ethernet LED slowly blinking green on my Mojo C-130 Wireless Access Point?
If the Power/Ethernet LED on your Mojo Wireless Access Point is slowly blinking green, it means the access point can't connect to the Mojo Cloud Services or Mojo Server.
Why is the Power/Ethernet LED slowly blinking orange on my Mojo C-130?
If the Power/Ethernet LED on your Mojo Wireless Access Point is slowly blinking orange, it means that the access point is currently being upgraded.
General| Wireless Standards | IEEE 802.11a/b/g/n/ac |
|---|---|
| Maximum Data Rate | Up to 1.3 Gbps |
| Antenna Type | Internal |
| Wi-Fi Technology | 802.11ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Power Source | 802.3af PoE |
Affix and snap the mounting bracket onto the T-Grid.
Securely attach the C-130 device to the bracket using its mounting posts.
Connect the C-130 using PoE+ or an AC power adapter.
Connect the device to a suitable switch port for network connectivity.
Verify the Power/Ethernet LED is solid GREEN, indicating operational status.
Explanation of Power/Ethernet LED states (Solid Orange, Fast Blink Green, etc.).
Steps to resolve Ethernet link, IP address, and cloud connection problems.
To Next Page
