Mojotone NC-1 - Secure Pickup Wire; Final Pickup Adjustment

Install the 2 self-adhesive wire clips to
the inside of the guitar and hook the
pickup lead wire into the bendable tabs
securely out of the way. Preferably on
the inside waist of the guitar.
Using a Phillips head screwdriver, loosen
the cork padded mounting clamps on
each side until the clamps are fully open
and insert the pickup into the soundhole.
You want the pickup to be as close to
the neck as possible. Tighten the clamps
gently until the pickup is secure. String the
guitar and adjust the pickup as needed
centering the logo under the strings.
7.
8.