molex 63827-5470 - User Manual

Hand Crimp Tool for ULTRA-FIT Crimp Terminals
Doc No: ATS-6382754HM Release Date: 01-30-15 UNCONTROLLED COPY Page 1 of 6
Revision: A Revision Date: 01-30-15
TYPE 4A
ROLLING
INSULATION
CRIMP HEIGHT
BRUSH
STRIP LENGTH
BELL MOUTH
CONDUCTOR
CRIMP HEIGHT
BEND DOWN
BEND UP
TWISTING
SEAM
CUT-OFF
TAB
WIRE
Application Tooling
Specification Sheet
Modular Crimp Head
Order No. 63827-5470
Hand Crimp Tool
Order No. 63827-5400
FEATURES
 A full cycle ratcheting hand tool ensures complete crimps
 Ergonomically designed soft handles
 Precisely designed crimping profiles with simple contact positioning
 Easy handling due to outstanding force ratio
 Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
 Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V),
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: ULTRA-FIT Crimp Terminals, 20-22 AWG (UL1061) wires.
Terminal
Series No.
Terminal Order No.
Wire Size
Insulation Diameter
UL1061 Wire is Recommended
Strip Length
AWG
mm²
Type
mm
In.
mm
In.
172253
172253-3111
172253-3112
20-22
---
UL1061
1.22-1.44
.048-.057
3.50-4.00
.138-.158
172253-3123
DEFINITION OF TERMS

Summary

Features

Scope

Definition of Terms

Crimp Specification

Operation

Terminal Locator Replacement

Removal

Steps for removing the terminal locator from the tool.

Installation

Steps for installing a new terminal locator onto the tool.

Maintenance

Miscrimps or Jams

Warranty

Applications for the Modular Crimp Head

Parts List

molex 63827-5470 Specifications

General

Brand	molex
Model	63827-5470
Category	Crimp tool
Language	English