3
Molift Air / www.molift.com
How to open
Disconnect battery
Emergency Stop
Activate emergency stop before
opening side covers.
Pull to activate emergency stop. The button will
come out, and hoist will stop.
Remove sidecovers
Sidecovers are snap-on and can be released by
pushing down the two buttons on top of the lifter
and pulling the sidecover outwards.
Sidecovers are interchangeable.
Disconnect battery before any
repair or service.
1. Activate emergency stop.
2. Open side cover.
3. Locate battery cable on PCB, and disconnect.
To Next Page
Loading...
