Molift Smart 150 User Manual (English)

Other manuals for Molift Smart 150

Operator's Manual20 pages

User Manual16 pages

Questions and Answers:

N
Nathaniel McintyreAug 2, 2025
What to do if my Molift Smart 150 Lifting Systems lifter does not respond to hand control action?
- A
  Aaron StewartAug 2, 2025
  If your Molift Lifting Systems lifter isn't responding to the hand control, there might be several reasons: * The emergency stop button may be activated. Try turning the button clockwise to reset it. * The battery might be empty. Replace or charge the battery. * The lifter's electronics could be overheated. Wait for it to cool down. * The lifter might be overloaded. Ensure the load does not exceed the Safe Working Load (SWL). * The hand control may not be plugged in properly. Ensure it is correctly plugged in.
C
Corey LarsenAug 8, 2025
Why my Molift Smart 150 Lifting Systems battery does not charge?
- J
  justinnunezAug 8, 2025
  If the battery of your Molift Lifting Systems is not charging, the issue could be: * A faulty battery. Check the indicators on the charger when charging and try another battery. * A faulty battery charger. Check the indicators on the charger when charging and try another charger.
P
Patricia SanfordAug 15, 2025
What to do if the lifting arm of Molift Lifting Systems moves uncontrolled?
- R
  Robert GarrettAug 15, 2025
  If the lifting arm of your Molift Lifting Systems moves uncontrollably: * There might be a short circuit between the hand control and the lifter. Clean the hand control plug surface with alcohol to remove any grease. * The hand control could be defective. Replace the hand control.