Moman MA6 User Manual

Thank you for choosing MOMAN product. Please read this manual carefully
before use and follow all instructions mentioned herein.
Microphone MA6
User Manual
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
2. The Use of Microphone
1. The Use of Wind Muff or Windshield
1). Attach the mic to clothing via the tie clip.
Please install the wind muff or windshield to the
microphone for wind noise suppression.
2). Plug it into your devices’ microphone jack.
Smartphone, Camera, Laptop
iPhone 7 and subsequent Apple devices
Some of Android devices
3.5mm Connector
Apple’s Lighting Adapter (excluded)
Type-C Adapter (excluded)
3. Battery Replacement
MOMAN MA6 uses a replaceable CR1220 battery. Please install or replace the
battery as shown below.
3). Indicator
4). Run the audio/video recording application in your device.
(Note: Android
devices need the third-party applications to operate the microphone.)
Battery Power
Working Status
On
High
Normal
Off
Low
Abnormal
MOMAN
Caring For Your MOMAN Product
Operations

Moman MA6 Specifications

General

Polar Pattern	Cardioid
Frequency Response	20Hz-20kHz
Connector	XLR
Max SPL	130 dB SPL
SNR	70dB
Power Supply	Phantom Power
Sensitivity	-38dB ± 2dB (0dB=1V/Pa at 1kHz)

Summary

Caring For Your MOMAN Product

Operations

The Use of Wind Muff or Windshield

Install the wind muff or windshield for wind noise suppression.

The Use of Microphone

Attach the microphone to clothing via the tie clip.

Connecting and Using the Microphone

Device Connection

Plug the microphone into your device's microphone jack.

Indicator Lights

Understand the indicator lights for battery power and working status.

Recording Application

Run an audio/video recording application on your device.

Battery Replacement

Specifications

Polar Pattern

Describes the microphone's polar pattern as omni-directional.

Performance Parameters

Details technical specifications like transducer, frequency response, and sensitivity.

Connectivity and Power

Information on audio cable, connector type, battery type, and battery life.