To Next PageTo Next Page
Need help?Do you have a question about the Moman C2 and is the answer not in the manual?
Provides essential guidelines for maintaining the product's condition and preventing damage.
Instructions for turning the system on and off by long-pressing the power button.
Details on how to pair the TX and RX units for wireless connectivity.
Guidance on connecting the receiver to audio devices using provided cables.
Steps for attaching the transmitter to a speaker and the receiver to a camera.
Instructions for charging the TX and RX units via the USB-C port.
Technical details and performance metrics of the transmitter unit.
Technical details and performance metrics of the receiver unit.
Provides essential guidelines for maintaining the product's condition and preventing damage.
Instructions for turning the system on and off by long-pressing the power button.
Details on how to pair the TX and RX units for wireless connectivity.
Guidance on connecting the receiver to audio devices using provided cables.
Steps for attaching the transmitter to a speaker and the receiver to a camera.
Instructions for charging the TX and RX units via the USB-C port.
Technical details and performance metrics of the transmitter unit.
Technical details and performance metrics of the receiver unit.
This document describes the Moman Microphone C2, a wireless microphone system consisting of a transmitter (TX) and a receiver (RX).
The Moman Microphone C2 is a digital 2.4GHz wireless microphone system designed for recording audio. The system captures audio signals and transmits them wirelessly to a receiver, which then outputs the audio to recording devices. The transmitter includes a built-in microphone and an external mic input, offering flexibility in audio capture. The receiver provides a 3.5mm output for connecting to various recording devices, such as cameras or smartphones, using either a TRRS Phone Cable or a TRS Camera Cable, depending on the device's requirements. The system is designed for ease of use, with automatic pairing and clear visual indicators for status and settings.
Power On/Off: To power the system on or off, a long press (2 seconds) on the power button of both the transmitter and receiver is required.
Pairing: The transmitter and receiver are designed to pair automatically upon power-on. If re-pairing is necessary, the process involves pressing the pairing button on the transmitter twice and the pairing button on the receiver once. This initiates a search and establishes a connection between the TX and RX units. The OLED screen on both units displays the pairing status and signal strength.
Audio Output and Connection: The receiver outputs audio signals through a 3.5mm jack. Users should select the appropriate cable (3.5mm TRRS Phone Cable or 3.5mm TRS Camera Cable) based on their recording device to ensure proper connection and audio transmission. The receiver's OLED screen provides visual feedback on the output level (PK=limiter) and allows for gain adjustment.
Transmitter Input: The transmitter offers dual input options: a built-in microphone for convenience and an external mic input for connecting a lavalier microphone. This flexibility allows users to choose the most suitable microphone setup for their recording environment and preferences. The input level (PK=limiter) is displayed on the transmitter's OLED screen, along with the TX battery status and signal strength.
Installation: For optimal audio capture, the transmitter or an external microphone should be attached to the speaker's collar. The receiver is designed to be installed onto a camera's hot shoe using its pocket clip. When using an external microphone, it is crucial to ensure it is properly inserted into the mic input on the transmitter.
Charging: Both the transmitter and receiver are powered by built-in lithium batteries. They are charged via a USB-C port using the provided charging cable. It is recommended to fully charge both units before use to ensure maximum operating time. The battery status is displayed on the OLED screens of both devices.
Display and Indicators: Both the transmitter and receiver feature OLED screens that provide essential information at a glance. On the receiver, the display shows:
On the transmitter, the display shows:
These indicators help users monitor the system's status, adjust settings, and troubleshoot any issues efficiently. The gain on the receiver is adjustable in 4 levels, providing control over the audio output volume.
Environmental Care: To ensure the longevity and optimal performance of the Moman Microphone C2, it is essential to keep the product in a dry, clean, and dust-free environment. This helps prevent damage from moisture and particulate matter that could affect internal components.
Protection from Harmful Substances: Users should keep corrosive chemicals, liquids, and heat sources away from the product. Exposure to such elements can lead to mechanical damage, corrosion, or malfunction.
Cleaning: For cleaning the device, only a soft and dry cloth should be used. Abrasive materials or harsh cleaning agents can scratch the surface or damage the electronic components.
Handling Precautions: The device is sensitive to physical impact. Malfunctions may occur if the product is dropped or subjected to external force. Users should handle the microphone system with care to avoid such incidents.
Unauthorized Disassembly: Users are strictly advised not to attempt to disassemble the product. Disassembling the device will void the warranty and may cause irreparable damage.
Professional Repair: In the event of any malfunction, the product should be checked or repaired only by authorized technicians. Attempting self-repair can lead to further damage and void the warranty.
Adherence to Instructions: Failure to follow all instructions provided in the manual may result in mechanical damage to the device. The warranty does not cover human errors or damage resulting from improper use.
Warranty: The warranty for the Moman Microphone C2 does not apply to human errors, emphasizing the importance of proper handling and adherence to the user manual's guidelines.
General| Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 20Hz - 20kHz |
| Connector | XLR |
| Power Supply | 48V Phantom Power |
| Cable Length | 2.5m |
| Weight | 346g |
| Dimensions | Ø52 x 187mm |
