3. HOW TO USE THE E-BIKE
3.1 DISPLAY AND ERROR CODES
NORMAL OPERATION
Turn on the device. Press and hold the On/Off button for 2 seconds on the display. Press and hold the Power button again for 2
seconds to turn off the display. If the bike is not in use, the display will automatically turn off after 5 minutes. (Can be adjusted)
LEVELS OF ASSISTANCE
In gear mode, press + or - to select between the desired level of assistance from the motor. The lowest level is 1, the highest is 5.
When the display is on, it defaults to level 1. When no level is shown on the display, there is no motor assistance.
SELECT THE LEVEL OF ENGINE ASSISTANCE
Tap the ”i” symbol to switch between distance and speed. Single-trip distance (TRIP km) --> Total distance (TOTAL km) --> Maxi-
mum speed (MAX km/h) --> Average riding speed (AVG km/h) is displayed in successive order.
SWITCH BETWEEN SPOTLIGHT/DISPLAY BACKLIGHT
Press and hold the spotlight icon for 2 seconds. The display backlight and beam loader will be turned on. Press the headlight icon
again for 2 seconds to turn off the lighting. If the display is turned on in a dark environment, the backlight will turn on automatically.
If the display backlight/headlight/backlight is turned off manually, they will also need to be turned on manually.
To Next Page
Loading...