3. HOW TO USE THE E-BIKE
3.1 DISPLAY AND ERROR CODES
WALKING MODE
Press down - for 2 seconds. The e-bike’s walking mode is started and the WALK symbol is displayed. As soon as - button is relea-
sed, the walking mode will end.
BATTERY STATUS INDICATION
When the battery status is normal, a certain number of the battery LCD segments and the limit light up according to the actual
charge amount. If all 10 segments go out with the frame ashing, the battery needs to be charged immediately.
DATA RESET
Press ”i” 2 times quickly. The display goes into menu mode. In the speed bar, tC will be displayed. If you press +, a y will also ap-
pear. Now all temporary data will be cleared, including max speed, standard speed and one-way.
If the user does not reset the data, the single trip and accumulated total driving time will be deleted automatically when the ac-
cumulated total driving time exceeds 99 hours and 59 minutes.
Data will not be deleted when the display’s light detection function is set to 0 or when it is turned off.
KM/MILE
When the speed bar shows S7, press + or - to toggle between km/h and mph.
To Next Page
Loading...