3a. Insert each of the front wheel (B) pins into the center of the socket until
you hear a “click”. Give each wheel a firm tug to ensure they’re securely
attached.
3b. To remove the front wheels, simply press the button at the back of
the wheel socket and pull down.
Chassis Assembly
8
CLICK
B
1. On the rear of the seat unit (E), fasten the hook and loop panels as
illustrated.
WARNING:
The fabric must cover the metal bracket.
Bassinet Mode
9
2a. Attach the seat unit to the
chassis. Line up the seat
connectors with the chassis
housing and press downwards.
Listen for a “click” to signal
correct assembly.
CLICK
E
To Next Page
Loading...