2b. Push the button located both sides of the seat connectors to remove the
seat unit from the chassis.
Bassinet Mode
10
1
2
3. Insert the bumper bar (D) into the seat unit slots ensuring that the release
buttons are on the outside and you hear a “click”.
Give the bumper bar a tug to ensure it’s securely in place.
To remove the bumper bar, simply press the release buttons on either or
both sides and lift up.
D
CLICK
4. Fasten the apron (G), secure the zip around the side and attach the hook
and loop fasteners over the bumper bar.
5a. Attach the canopy (F) to the seat unit.
First attach the plastic canopy clips to their respective sides, ensuring
that they sit over the small plastic guides located on each side of the seat
unit frame.
5b. Next, secure the canopy to the frame with the zip. Start with the right
side (when facing the seat).
G
F
Bassinet Mode
11
1
2
To Next Page
Loading...