Need help?Do you have a question about the Monacor MPX-52PA and is the answer not in the manual?
Details the controls and connectors found on the mixer's front panel.
Details the connectors and features located on the mixer's rear panel.
Initial setup procedures for input channels, including gain and EQ settings.
Instructions for setting input gain levels on channels CH 1 through CH4.
Instructions for setting input gain levels for the dedicated microphone channel.
Guidance on assigning inputs and adjusting output levels and tone controls for zones.
Details the controls and connectors found on the mixer's front panel.
Details the connectors and features located on the mixer's rear panel.
Initial setup procedures for input channels, including gain and EQ settings.
Instructions for setting input gain levels on channels CH 1 through CH4.
Instructions for setting input gain levels for the dedicated microphone channel.
Guidance on assigning inputs and adjusting output levels and tone controls for zones.
General| Equalizer | 3-band |
|---|---|
| Frequency range | 20 Hz - 20 kHz |
| Input Sensitivity | Line: 150mV |
| Frequency Response | 20 Hz - 20 kHz |
| Power Supply | 230 V, 50 Hz |
To Next Page
