Monacor security DA-8000RC - User Manual

®
Copyright
©
by MONACOR INTERNATIONAL GmbH & Co. KG, Bremen, Germany. All rights reserved. A-0434.99.01.07.2005
®
DA-8000
Best.-Nr.04.3060
D A CH
Bedienmenü
User Menu
GB
Alarmzentrale ist unscharf
alarm control system is unset
Zugangscode eingeben
(voreingestellt = 5, 6, 7, 8)
enter access code
(default = 5, 6, 7, 8)
5 6 7 8
Do You Want to...
Set User 1 ?
No
Full
nicht länger als 15 Sek. warten,
sonst wird das Menü wieder verlassen
do not wait more than 15 sec. otherwise
the menu will be exited
Do You Want to...
Test ?
No
Yes
Do You Want to...
Delete Zone ?
No
Yes
Do You Want to...
Select Options ?
No
Yes
0
0
0
Do You Want to...
Program Chime ?
Yes
No
Do You Want to...
Program Codes ?
No
Yes
Do You Want to...
Set Date/Time ?
Yes
No
Do You Want to...
View Log ?
Yes
No
01 Jan 17:51:54
KP Tamper
No
01 Jan 06:30:54
Off User 1
Yes
01 Jan 03:05:12
Alarm
No
Yes
01 Jan 03:05:12
Zone4
0
No
Yes
(nur Beispiele)
(examples only)
Type Day/Mnth
0000
"
Type Day/Mnth
2807 "
1 0
...
Yes
Type Hrs/Mins
0000
"
1 0
...
Yes
Type Hrs/Mins
1545 "
28 Jul 15:45
Ok?
Yes
No
Code 5
####
Chime
Off
No
Chime
On
Yes
0
länger zurückliegende Ereignisse
jüngere Ereignisse
previous events
recent events
No
Yes
0
0
0
0
Exit Now!...
Ok!
01 Jan 12:35
<<< SET >>>
Austrittverzögerungszeit läuft ab
exit delay time is running
Alarmzentrale ist scharf
alarm control system is set
5
6
7
8
(Voreinstellung)
(default setting)
01 Jan 13:17
<<< UNSET >>>
Alarmzentrale ist unscharf
alarm control system is unset
Walktesting...
Ok!
Walktesting...
Zone8
In jeder Zone einen Alarm auslösen
trigger an alarm in each zone
0
9
In dieser Menüebene lässt sich mit der Taste 9
zum Testen die Sirene und Blitzleuchte ein- und ausschalten
in this menu level it is possible to switch on and off the siren
and strobelight for testing with the button 9
Enabled Zones...
12345678
0
1
5
Beispiel
example
Enabled Zones...
-234-678
Do You Want to...
Test ?
7
6
3
9
Beispiel • example
Code 5
7639
"
Yes
01 Jan 09:59
<<< UNSET >>>
No Yes
YesYes
0
000
Ereignisse abrufen
calling the log
Datum und Uhrzeit einstellen
setting date and time
Zugangscode ändern oder
weitere Codes einrichten
changing the code or
creating further codes
Funktion „Chime“ ein- und ausschalten
switching on and off the function “Chime”
Zonen deaktivieren und Zentrale scharf schalten
deactivating zones and activating the alarm control system
Testmodus
test mode
Zentrale scharf oder unscharf schalten
setting or unsetting the alarm control system
No
Code 5
0000
"
0
Do You Want to...
Set User 1 ?
0
wenn kein Alarm mehr anliegt
if no alarm is present any more
Yes
Select 1..9
5
Code 5 Text
User 5
No
Yes
Code 5 Text
-
Code 5 Text
W
Yes
Code 5 Text
W-
...
1
= A, B, C
2
= D, E, F
3
= G, H, I
4
= J, K, L
5
= M, N, O
6
= P, Q, R
7
= S, T, U
8
= V, W, X
9
= Y, Z, blank
0
= 1, 2, … 0
Yes
Code 5 Text
WALTER-
Yes
vom letzten dargestellten Zeichen
bis zum 8. Zeichen
Leerzeichen eintippen
enter blanks from the last character
shown to the 8th character
Code 5 Text
WALTER
Part
2
3
Part 3
Part 2
Part 1
Full
Modus
mode
Beispiel
example
Full
Part
®

Summary

Overview of the Individual Alarm Zones

Setting Facilities

Creating or deleting access codes

Allows users to create or remove access codes for system operation.

Setting time and date

Procedure to configure the alarm system's date and time settings.

Switching on and off the function Chime

Enables or disables the chime alert function for zones.

Activating and Deactivating the Alarm Control System

Full activation mode

Details on activating the alarm system for complete zone coverage.

Partial activation mode Part 1

How to activate the system, excluding zones programmed for Part 1.

Partial activation modes Part 2 and Part 3

Activating the system with specific zones excluded for Part 2 or Part 3.

Excluding certain zones from the alarm recording

Procedure to temporarily exclude zones from alarm recording.

Deactivating the alarm control system

Steps to disarm the alarm system using keypad or key switch.

Alarm

Stopping the alarm triggering and resetting the alarm

Procedure to silence and reset triggered alarms and tamper events.

Reset in case of tampering actions (Tamper Reset)

How to reset the system after a tamper detection.

Reset in case of alarm (Alarm reset)

Different methods for resetting the alarm based on access code type.

Overview of the alarm messages in the display

Explanation of various status and alarm messages shown on the display.

Reading the log

Instructions for accessing and reviewing logged system events.

Test Mode

Monacor security DA-8000RC Specifications

General

Brand	Monacor
Model	security DA-8000RC
Category	Security System
Language	English