Monarch 295SEPC1K - User Manual

To Next Page

CONTENTS

1A - General information

1B - Technical specifications

1C - Main components

1 - TRANSMITTER OVERVIEW

2 - NUMBERING

3 - PROGRAMMING

4 - OPERATION

5 - BATTERY ACCESS

1B - Technical specifications

Operating frequency 295 MHz

Number of keys: 1

Battery : 2 x 3V lithium batteries CR2016

Battery life: 18 ÷ 24 months

Number combinations : 65,536

Protocol : ClikCard® compatible

Different Facilities codes 64

Operating temperature: -20°F÷+131°F (-20°C÷+55°C)

Overall dimensions: 2.4”x1.4”x0.51” (61x36x13 mm)

Weight: 0.49 oz. (14 gr.)

1C - Main components

Red

LED

Key ring

holder

Dark grey

push-button

Transmitter

Solutions

Thank you for choosing a Transmitter Solutions product .

Please read this manual carefully before using the product.

6 - TROUBLESHOOTING

Manual

MONARCH 295SEPC1K

Dark grey

case

Fig. 2

1A - General information

The Transmitter Solutions - Monarch 295SEPC1K transmitter is a key

chain style mini transmitter operating at 295 MHz. It has been designed

for use with programmable telephone entry, security, and access control

systems operating with a 295 MHz frequency receiver.

The protocol is ClikCard® compatible and the code sent by the

transmitter includes a 16 bit security code which allows up to 65,536

combinations and 6 bit of facility code for 64 different combinations.

The Transmitter Solutions - 295R receiver which operates with this

transmitter has a Wiegand 26 bit and can operate any type of access

control system equipped with the same protocol. The CR 2016 lithium

batteries of the transmitter have a shelf life of about 6 months. The

product fully complies with Part 15 of FCC Regulations and the

European Directives 99/5/CE, 89/336/CEE, 73/23/CEE.

Need help?

Do you have a question about the Monarch 295SEPC1K and is the answer not in the manual?

Summary

Transmitter Overview

General Information

Details the Monarch 295SEPC1K transmitter's function, frequency, protocol, and code structure.

Technical Specifications

Lists key technical details like operating frequency, battery type, dimensions, and weight.

Main Components

Identifies and illustrates the primary physical parts of the transmitter.

The Transmitter Solutions - Monarch 295SEPC1K is a key chain style mini transmitter designed for use with programmable telephone entry, security, and access control systems. It operates at a frequency of 295 MHz and is compatible with 295 MHz frequency receivers. The device utilizes a ClikCard® compatible protocol, incorporating a 16-bit security code that allows for up to 65,536 combinations, and a 6-bit facility code for 64 different combinations. Each transmitter is manufactured with a unique factory-set serial number.

Technical Specifications:

Operating frequency: 295 MHz
Number of keys: 1
Battery: 2 x 3V lithium batteries CR2016
Battery life: 18 - 24 months
Number combinations: 65,536
Protocol: ClikCard® compatible
Different Facilities codes: 64
Operating temperature: -20°F to +131°F (-20°C to +55°C)
Overall dimensions: 2.4" x 1.4" x 0.51" (61 x 36 x 13 mm)
Weight: 0.49 oz. (14 gr.)

The device is designed to be used with the Transmitter Solutions - 295R receiver, which features a Wiegand 26-bit output, allowing it to integrate with various access control systems that support the same protocol. The CR 2016 lithium batteries have an estimated shelf life of approximately 6 months. The product fully complies with Part 15 of FCC Regulations and European Directives 99/5/CE, 89/336/CEE, and 73/23/CEE.

Usage Features:

To operate the transmitter, firmly depress the dark grey push-button until the small red LED illuminates. Once the LED is lit, release the button. If the intended device does not respond, repeat the process. The transmitter must be programmed into the system memory, and instructions for this process should be provided by the installer or reseller.

Maintenance Features:

Battery Access: To access the batteries, open the case by inserting a screwdriver into the slot between the cover and the bottom, then remove the bottom. Slide out the old CR2016 batteries and replace them with new ones, ensuring correct polarity with the positive (+) side facing upward. Proper disposal of used batteries should follow local laws and regulations. After replacing the batteries, test the installation by pushing the button and verifying that the red LED illuminates.

Troubleshooting:

System does not receive transmitter signal, transmitter LED does not light: Replace the transmitter batteries.
System does not receive transmitter signal, transmitter LED is ON: Check to verify the transmitter is programmed into your system.
Operating range is reduced: Replace the transmitter batteries.

Warranty:

The Transmitter Solutions 295 transmitters come with a 60-month warranty, starting from the manufacturing date. During this period, if the product malfunctions due to a defective component, it will be repaired or replaced at the sole discretion of Transmitter Solutions. The warranty does not cover damage to the transmitter case caused by external conditions or battery life.

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized changes or modifications to Transmitter Solutions equipment could void the manufacturer's warranty.