Monarch 433TSPW1K User Manual

1A - General information
The Transmitter Solutions - Monarch transmitter is a key chain style mini
transmitter operating at 433,92 MHz. It has been designed for the
control of automatic closing systems and anti-burglar systems, thanks
to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation, avoiding
any scanning and copying risk. A special algorithm allows to keep
synchronized transmitter and receiver.
CONTENTS
1A - General information
1B - Technical specifications
1C - Main components
1 - TRANSMITTER OVERVIEW
2 - NUMBERING
3 - PROGRAMMING
4 - OPERATION
5 - BATTERY ACCESS
1B - Technical specifications
Operating frequency 433,92 MHz
Number of keys: 1
Battery : 2 x 3V lithium batteries CR2016
Battery life: 18 ÷ 24 months
Security code: Keeloq® Hopping code
Number combinations : 2exp64
Operating temperature: -20°F÷+131°F (-20°C÷+55°C)
Overall dimensions: 2.4”x1.4”x0.51” (61x36x13 mm)
Weight: 0.49 oz. (14 gr.)
The transmitter can operate with many receivers of the range
Transmitter Solutions - 433R. Ask your installer or reseller the product
which best fits your application. The output of the receivers can be either
wiegand 26 bit ( to communicate with access control systems ) or 1-2-4
relay with NO - NO/NC output. The CR 2016 lithium batteries of the
transmitter have a shelf life of about 6 months. The product fully
complies with Part 15 of FCC Regulations and the European Directives
99/05/CE, 89/336/CEE, 73/23/CEE.
1C - Main components
Red
LED
Key
holder
ring
Dark red
push-button
6 - TROUBLESHOOTING
Manual
MONARCH 433TSPW1K
Dark grey
case
Fig. 2
Transmitter
Solutions
Thank you for choosing a Transmitter Solutions product .
Please read this manual carefully before using the product.
Made in Italy. Copyright © 2006 by Transmitter Solutions

Monarch 433TSPW1K Specifications

General

Brand	Monarch
Model	433TSPW1K
Category	Transmitter
Language	English

Summary

Transmitter Overview

General Information

The Monarch transmitter is a mini key chain style device operating at 433.92 MHz, designed for security systems using KeeLoq® Hopping code.

Technical Specifications

Details operating frequency, battery, security code, temperature, dimensions, and weight for the transmitter.

Main Components

Identifies physical components like LED, case, push-button, and key ring holder.

Operation and Battery Access

Operating the Transmitter

Instructions on how to depress and release the button to activate the transmitter and observe the LED indicator.

Battery Replacement

Procedure for opening the case, removing old batteries, and inserting new CR2016 batteries with correct polarity.

Troubleshooting and Compliance

Troubleshooting Common Issues

Provides solutions for problems such as no transmitter signal, LED not lighting, or reduced operating range.

FCC Compliance Information

States the device complies with FCC Part 15 rules and the conditions for operation.

Warranty and Manufacturer Details

Outlines the 24-month warranty period, limitations, and provides contact information for Transmitter Solutions.