EasyManua.ls Logo

Monbebe SW130 - Troubleshooting; Solución de Problemas

Monbebe SW130
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Piezas de reposiciónReplacement Parts
• Canopy
• Adapter
• To order parts call (800) 544-1108.
Include the model number (SW009,
SW130) and manufacture date (found
on the bottom of the swing base) and a
brief description of the part.
• Capota
• Adaptador
• Para pedir piezas llame al (800) 544-1108.
Incluya el número de modelo (SW009,
SW130) y la fecha de fabricación (que se
encuentra en la base de la mecedora) y
una breve descripción de la pieza.
Fastself-inspectionsolutionbelow
Troubleshooting Solución de problemas
Solucióndeautoinspecciónrápidaacontinuación
Trouble Problema
No Power No enciende
The power
light keeps
flashing/
high voltage
alarms
La luz de en-
cendido sigue
parpadeando/
alarmas de
alta tensión
Motion lock
stuck
Bloqueo de
movimiento
atascado
Swing is
shaking
El balanceo
tiembla
1. Check whether the
adapter and DC cable are
firmly connected. If loose,
connect them firmly.
2. DC cable may be
damaged. Please contact
Consumer Care to replace
DC cable.
1. Compruebe si el adaptador
y el cable de CC están co-
nectados correctamente.
En caso de estar flojos,
conéctelos bien firmes.
2. Es posible que el cable de CC
esté dañado. Comuníquese
con Atención al Consumidor
para reemplazar el cable de
CC.
Use matchable adapter with
an output voltage of 6V and
1A.
Utilice un adaptador
compatible con un voltaje de
salida de 6V y 1A.
Check the motion lock. Pull it
up to unlock the seat frame.
Verifique el bloqueo de mov-
imiento. Tire hacia arriba para
desbloquear el armazón del.
Power o and restart it again.
Apáguela y vuelva a encend-
erla.
Solution Solución
Note: For other trouble, please contact
our customer service for help. Never
disassemble and repair the swing by
yourself.
Nota: Si tiene otros problemas, co-
muníquese con nuestro servicio de atención
al cliente para obtener ayuda. Nunca de-
sarme y repare la mecedora usted mismo.