What to do if my Moneual MBOT 900 LED is lit red with 3 beeps?
If the Moneual Vacuum Cleaner's LED is lit red and beeping 3 times, it could mean that the main brush is blocked or dirty, or that the charging station cannot be found. To resolve this, clean the area around the main brush, place the appliance near the charging station, or ensure the charging station is receiving power.
What to do if Moneual MBOT 900 Vacuum Cleaner LED is red and beeping 4 times?
If the LED is lit red and beeping 4 times on your Moneual Vacuum Cleaner, it indicates that the device is stuck. To fix this, simply move the device to a different position and try again.
How to fix Moneual MBOT 900 when the LED is lit red with 2 beeps?
If the LED is lit red accompanied by 2 beeps, it means the side brushes are either blocked or dirty. To fix this, clean the side brushes of your Moneual Vacuum Cleaner.
Why is the LED on my Moneual MBOT 900 red with 1 beep?
If the LED is lit red and beeping once, the drive wheels may be faulty or dirty, or the battery charge could be too low. Check that the drive wheels are not blocked, dirty, or damaged. Also, ensure that you charge your Moneual Vacuum Cleaner.
What to do if Moneual MBOT 900 LED flashes red with 5 beeps?
If the LED flashes red and beeps 5 times, it indicates that the dust bin was removed during cleaning. Reinsert the dust bin into your Moneual Vacuum Cleaner to resolve this issue.
Why does my Moneual MBOT 900 flash red and beep 3 times?
If the LED flashes red and beeps 3 times on your Moneual Vacuum Cleaner, it indicates an issue with the floor or fall sensors. Check if the device is already on the floor or if the floor sensors are dirty.
What does it mean when my Moneual MBOT 900 Vacuum Cleaner flashes red and beeps 4 times?
If the LED flashes red and beeps 4 times, it means the laser sensor is blocked or there are no obstacles nearby. Ensure that the laser sensor on your Moneual Vacuum Cleaner is not blocked or covered, and place the appliance near obstacles.
Why is the LED on my Moneual MBOT 900 Vacuum Cleaner lit red with 5 beeps?
If the LED is lit red and beeping 5 times, it means that the device is strongly inclined or the suction motor is faulty. Place the Moneual Vacuum Cleaner on level ground.
What does it mean when Moneual Vacuum Cleaner LED flashes red and beeps 1 time?
If the LED flashes red and beeps once, it indicates that the dust bin was removed during standby. Reinsert the dust bin into the Moneual Vacuum Cleaner.
What to do if Moneual MBOT 900 Vacuum Cleaner flashes red and beeps 2 times?
If the LED flashes red and beeps twice, it indicates a problem with the wall sensor (right side). Check whether the wall sensor on your Moneual Vacuum Cleaner is faulty or dirty.
Critical safety instructions, warnings, and notes for proper and safe operation of the robot cleaner.
Download the free smartphone app for full usage and functionality of the MBOT900.
Instructions for downloading and installing the MBOT app from app stores.
Ensure device is undamaged and fully charged before first use.
Keep away from precipices, inform others, and note obstacle height limits.
Using the ON/OFF button for powering the device on, off, and confirming errors.
Using the HOME button for pausing, returning to charging, or spot cleaning.
Enables targeted cleaning of specific zones or areas independent of the map.
Creating and defining zones (Normal, No Go, Prohibited, Double) on the robot's map.
Selecting a specific area to be cleaned intensively using the app.
Performing quick checks for device faults and full functionality using the app.
Interpreting LED flashes (e.g., red 1 beep, red 2 beeps) and their causes/solutions.
Understanding solid red LED lights (e.g., red 1 beep, red 5 beeps) and troubleshooting steps.
Decoding audio signals like 'LED aus 5x Ton' or 'LED lit red 1.5 sec. beep' for errors.
General| Shape | Round |
|---|---|
| Product color | Black, Green |
| Dust container type | Dust bag |
| Smartphone remote support | Yes |
| Noise level | - dB |
| Wet mopping | No |
| Dust capacity (total) | 0.4 L |
| Automatic base station return | - |
| Battery voltage | 14.4 V |
| Battery capacity | 2600 mAh |
Weight and Dimensions| Height | 99 mm |
|---|---|
| Weight | 5200 g |
| Diameter | 345 mm |
To Next Page
