Mongoose M20 - Remote Security Key Operation; Button Functions and Boot Release

REMOTE SECURITY KEY – 2 supplied
BUTTON ONE ONLY
‘ARM’ (& LOCK)
PRESS FOR 1.5 SECONDS
TO ARM THE SECURITY SYSTEM -
(DOORS WILL ALSO LOCK IF THE
CENTRAL LOCKING HAS BEEN
CONNECTED)
SENSOR DISABLE
PRESS BUTTON ONE WITHIN 5
SECONDS OF ARMING TO BYPASS
THE SHOCK SENSOR
‘PANIC’
PRESS FOR AT LEAST 2 SECONDS
TO SOUND THE SIREN
AND FLASH THE INDICATORS
BUTTON 1 & 2 TOGETHER
SILENT ARM
PRESS BOTH BUTTONS TO
SILENTLY ARM THE SYSTEM
WITHOUT SIREN CHIRPS. DISARM
IS AUTOMATICALLY SILENT
BUTTON TWO ONLY
‘DISARM’ (& UNLOCK)
PRESS BUTTON TWO TO
DISARM THE ALARM SYSTEM.
(DOORS WILL ALSO UNLOCK
IF THE CENTRAL LOCKING
HAS BEEN CONNECTED)
BOOT RELEASE
(CH’2 OUTPUT)
PRESS BUTTON TWO FOR 3
SECONDS FOR CHANNEL 2
OUTPUT.
eg; BOOT RELEASE (OPTIONAL)
This remote control is designed to allow for your
ignition key to be inserted as shown on the left.
Disassemble the remote and use the blanking
plate as a template for cutting your key to shape.
Drill three small holes and re-assemble.