EasyManua.ls Logo

Mongoose M20 - System Status Indicators; Indicator and Chirp Confirmations; Dash Mounted LED Status

Mongoose M20
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INDICATOR FLASH CONFIRMATION / CODES
This is a visual indication of system status.
A) 1 Flash - Armed
B) 2 Flash - Disarmed
CHIRP CONFIRMATION / CODES
This is an audible indication of system status.
A) 1 Chirp - Armed
B) 2 Chirps - Disarmed
C) 3 Chirps - Door, bonnet & boot open when arming
D) 4 Chirps - Disarm and indicates the alarm has been triggered
E) Fast chirps - Light impact detected by the shock sensor
DASH MOUNTED WARNING LIGHT - LIGHT EMITTING DIODE (LED)
Located on or near the dashboard area, the LED is a small flashing light that indicates the vehicle is fitted with a
security system. The LED also tells the status of the alarm;
A) Slow flashing - System armed
B) Fast flashing - Automatic last door arming countdown
B) LED off - System off
C) Continuously lit - Valet mode
D) 1 flash, 1 pause - Door, bonnet or boot triggered
E) 2 flash, 1 pause - Sensor triggered
F) 3 flash, 1 pause - Ignition triggered
If you disarm the alarm and hear 4 chirps, the alarm has been triggered. By reading the flash codes above, you
can determine which circuit has been triggered.
7

Related product manuals