Mongoose R6174 - Adjusting The Handlebar

4 Adjustments
26
Figure 4.10
WARNING!
• Improper adjustment of the handlebar may result in
damage to the stem post, steering tube and result in loss of
control, serious injury or death. Ensure the minimum
inseron marks on the stem post are not visible above the
top of the headset.
• Failure to properly ghten handlebar components may
result in loss of control, serious injury or death. Always
check the handlebar cannot move and is secured to the
frame before riding the scooter.
ADJUSTING THE HANDLEBAR
Adjusng the Handlebar Height
❶ Turn the front fork to face forward. Figure 4.10
❷ Using a 14 mm open-end wrench loosen the stem binder
bolt.
❸ Adjust the handlebar height unl the rider feels they have
control of the scooter and are comfortable.
Important! Be sure the minimum inseron marks do not go
above the top of the headset and are not visible.
❹ Tighten the stem binder bolt. Check the handlebar binder
bolts to be sure they are properly ghtened and the
handlebar is clamped in place.
Minimum
inseron marks
Front fork
facing forward
Handlebar binder
bolts
Headset
Stem post
Steerer tube
Stem binder bolt
1
2
3