Monitor Audio Radius R225 - Technical Specifications

13
© Monitor Audio 2005 Rev 3
10. Speaker Output: This provides output to satellite speakers via a built in high
pass filter.
11. The Mains Fuse: This should be replaced with one of identical specification.
Note: A spare fuse is provided within the fuse holder, located in the plastic holder
below the IEC mains input socket. If a fuse blows more than once, it is advisable to
have the subwoofer unit checked by an authorised service agent.
12. Mains Voltage Selector: This is factory set to your countries mains voltage
specification. Do not attempt to adjust this as this may lead to permanent damage
to the product and even the risk of fire.
Technical Specifications
Radius 360
Radius 720
Frequency
Response
Phase control
Frequency
Control
Bass
Alignment
Drive Unit
Complement Bass
27 Hz –
180 Hz
0 - 180
degrees
Variable
40 Hz - 180 Hz
Downward
Ported Bass
Reflex With
HiVe
®
Technology
1x 8” Ultra long
throw sub bass
driver. Hand treated
paper cone woofer
External
Dimensions
(cm)
High Pass
Filter (speaker
level output)
Mains Power
input (switch
able)
Power Output
Weight Kg
(each)
36.5 H (Inc
feet) x 22.5 W
x 34 D (Inc
amp)
100Hz @
6dB/octave
110-
120v 60Hz
220-240v 50Hz
100W (RMS)
@ 4 Ohms
13.9
Frequency
Response
Phase control
Frequency
Control
Bass
Alignment
Drive Unit
Complement Bass
25 Hz –
180 Hz
0 - 180
degrees
Variable
40 Hz - 180 Hz
Active 2
nd
order
12dB/Octave
two stage filter
Rear Ported
Bass Reflex
With HiVe
®
Technology
2x 8” Ultra long
throw sub bass
driver. Hand treated
paper cone woofer
External
Dimensions
(cm)
High Pass
Filter (speaker
level output)
Mains Power
input (switch
able)
Power Output
Digital Class D
Amplifier
Weight Kg
(each)
45.5 H (Inc
feet) x 22.5 W
x 48 D (Inc
amp)
100Hz @
6dB/octave
110-
120v 60Hz
220-240v 50Hz
250W (RMS)
@ 4Ohms
20.1