Monitor TrueCap MK-2 - Calibration and Settings; Calibration Procedure; Sensitivity Settings; Test Function Operation

6
C AL IBR AT ION
Figure 12
Calibration:
The calibration of the MK-2 is accomplished by the push-button
designated “CAL” (See Figure 10). This feature allows the unit
to ignore any initial capacitance caused by the vessel configu-
r
ation or material build-up on the probe and driven shield. This
procedure can be done at any time after installation in order to
accommodate for any changes in the configuration of the probe
or vessel, or extreme product build-up.
1) To initiate the calibration feature, ensure that the probe is
not submerged in the material.
2) Press and release the “CAL” button. The “CAL” LED will
flash for a short period and then remain illuminated when
complete denoting proper calibration.
Figure 10
SESSENSOR CONTSENSENSSENSOSENSORSENSOR SENSOR CSENSOR COSENSOR CONSENSOR CONTROLS & INDICASENSOR CONTRSENSOR CONTROSENSOR CONTROLSENSOR CONTROLSSENSOR CONTROLS SENSOR CONTROLS &SENSOR CONTROLS & SENSOR CONTROLS & ISENSOR CONTROLS & INSENSOR CONTROLS & INDSENSOR CONTROLS & INDISENSOR CONTROLS & INDICSENSOR CONTROLS & INDICATSENSOR CONTROLS & INDICATOSENSOR CONTROLS & INDICATORSSENSOR CONTROLS & INDICATORSENSOR CONTROLS & INDICATORS
TERMITTETERTERMTERMINTERMINALTERMINATERMINAL BLTERMINAL TERMINAL BTERMINAL BLOTERMINAL BLOCTERMINAL BLOCKTERMINAL BLOCK
C
TERMINAL BLOCK
CO
TERMINAL BLOCK
COM
TERMINAL BLOCK
COM1
TERMINAL BLOCK
COM1 NC
TERMINAL BLOCK
COM1
TERMINAL BLOCK
COM1
TERMINAL BLOCK
COM1 N
TERMINAL BLOCK
COM1 NC2
TERMINAL BLOCK
COM1 NC21
TERMINAL BLOCK
COM1 NC21 NO1
TERMINAL BLOCK
COM1 NC21
TERMINAL BLOCK
COM1 NC21 N
TERMINAL BLOCK
COM1 NC21 NO
TERMINAL BLOCK
COM1 NC21 NO1
NO2NNONO2 NCNO2 NO2 NO2 NNO2 NC2NO2 NC2 CNO2 NC2 NO2 NC2 NO2 NC2 CONO2 NC2 COMNO2 NC2 COM2NO2 NC2 COM2
OUTP
NO2 NC2 COM2
O
NO2 NC2 COM2
OU
NO2 NC2 COM2
OUT
NO2 NC2 COM2
OUTPU
NO2 NC2 COM2
OUTPUT
NO2 NC2 COM2
OUTPUT
(DEPL
NO2 NC2 COM2
OUTPUT
(
NO2 NC2 COM2
OUTPUT
(D
NO2 NC2 COM2
OUTPUT
(DE
NO2 NC2 COM2
OUTPUT
(DEP
NO2 NC2 COM2
OUTPUT
(DEPLU
NO2 NC2 COM2
OUTPUT
(DEPLUGGABL
NO2 NC2 COM2
OUTPUT
(DEPLUG
NO2 NC2 COM2
OUTPUT
(DEPLUGG
NO2 NC2 COM2
OUTPUT
(DEPLUGGA
NO2 NC2 COM2
OUTPUT
(DEPLUGGAB
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMI
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
T
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TE
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TER
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERM
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMIN
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMINAL
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMINA
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMINAL BL
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMINAL
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMINAL B
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMINAL BLO
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMINAL BLOC
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMINAL BLOCK
NO2 NC2 COM2
OUTPUT
(DEPLUGGABLE)
TERMINAL BLOCK
PUPPUSHPUSPUSHBUPUSHBPUSHBUTTOPUSHBUTPUSHBUTTPUSHBUTTONPUSHBUTTON
SYSTEM
PUSHBUTTON
S
PUSHBUTTON
SY
PUSHBUTTON
SYS
PUSHBUTTON
SYST
PUSHBUTTON
SYSTE
PUSHBUTTON
SYSTEM RESET
PUSHBUTTON
SYSTEM
PUSHBUTTON
SYSTEM R
PUSHBUTTON
SYSTEM RE
PUSHBUTTON
SYSTEM RES
PUSHBUTTON
SYSTEM RESE
PUSHBUTTON
SYSTEM RESET
PO
PUSHBUTTON
SYSTEM RESET
P
PUSHBUTTON
SYSTEM RESET
POWER
PUSHBUTTON
SYSTEM RESET
POW
PUSHBUTTON
SYSTEM RESET
POWE
PUSHBUTTON
SYSTEM RESET
POWER
BUTTONBBUBUTBUTTBUTTOBUTTON
PU
BUTTON
P
BUTTON
PUSH
BUTTON
PUS
BUTTON
PUSH-
BUTTON
PUSH-
SLIDE SWSSLSLISLIDSLIDESLIDE SLIDE SSLIDE SWITCHSLIDE SWISLIDE SWITSLIDE SWITCSLIDE SWITCH
LE
SLIDE SWITCH
L
SLIDE SWITCH
LED
SLIDE SWITCH
LED (
SLIDE SWITCH
LED
SLIDE SWITCH
LED (R
SLIDE SWITCH
LED (RE
SLIDE SWITCH
LED (RED
SLIDE SWITCH
LED (RED)
SLIDE SWITCH
LED (RED)
O
P
SLIDE SWITCH
LED (RED)
O
SLIDE SWITCH
LED (RED)
OP
E
SLIDE SWITCH
LED (RED)
O
PER
SLIDE SWITCH
LED (RED)
O
PERATION
SLIDE SWITCH
LED (RED)
O
PERA
SLIDE SWITCH
LED (RED)
O
PERAT
SLIDE SWITCH
LED (RED)
O
PERATI
SLIDE SWITCH
LED (RED)
O
PERATIO
SLIDE SWITCH
LED (RED)
O
PERATION
OUTP
SLIDE SWITCH
LED (RED)
O
PERATION
O
SLIDE SWITCH
LED (RED)
O
PERATION
OU
SLIDE SWITCH
LED (RED)
O
PERATION
OUT
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPU
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE M
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
F
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FA
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAI
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAIL
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILS
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSA
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAF
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MO
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MOD
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNC
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
F
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FU
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUN
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCT
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTI
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTIO
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
A
DJUSTM
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
A
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
AD
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJ
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJU
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUS
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUSTM
E
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MEN
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TI
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
T
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TIME DEL
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TIM
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TIME
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TIME
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TIME D
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TIME DE
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TIME DELA
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TIME DELAY
SLIDE SWITCH
LED (RED)
O
PERATION
OUTPUT
FAILSAFE MODE
FUNCTION
ADJUST
MENT
TIME DELAY
PUPPUSHPUSPUSHBUPUSHBPUSHBUTTOPUSHBUTPUSHBUTTPUSHBUTTONPUSHBUTTON
CAL
PUSHBUTTON
C
PUSHBUTTON
CA
PUSHBUTTON
CALI
PUSHBUTTON
CALIBRATI
PUSHBUTTON
CALIB
PUSHBUTTON
CALIBR
PUSHBUTTON
CALIBRA
PUSHBUTTON
CALIBRAT
PUSHBUTTON
CALIBRATIO
PUSHBUTTON
CALIBRATION
PUSHBUTTON
CALIBRATION
LE
PUSHBUTTON
CALIBRATION
L
PUSHBUTTON
CALIBRATION
LED
PUSHBUTTON
CALIBRATION
LED (
PUSHBUTTON
CALIBRATION
LED
PUSHBUTTON
CALIBRATION
LED (Y
PUSHBUTTON
CALIBRATION
LED (YE
PUSHBUTTON
CALIBRATION
LED (YELLOW
PUSHBUTTON
CALIBRATION
LED (YEL
PUSHBUTTON
CALIBRATION
LED (YELL
PUSHBUTTON
CALIBRATION
LED (YELLO
PUSHBUTTON
CALIBRATION
LED (YELLOW)
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTIPUSHBUTTON
CALIBRATION
LED (YELLOW)
DPUSHBUTTON
CALIBRATION
LED (YELLOW)
DEPUSHBUTTON
CALIBRATION
LED (YELLOW)
DETPUSHBUTTON
CALIBRATION
LED (YELLOW)
DETEPUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECPUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTPUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTIOPUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTIONPUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
L
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
L E
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (G
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GR
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GRE
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREE
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CAL
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
C
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CA
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALI
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATI
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIB
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBR
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRA
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRAT
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATIO
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L E
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
LE
DS (RED)
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
ED
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (R
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RE
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SE
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
S
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVITY STATUS
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SEN
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENS
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSI
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSIT
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITI
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIV
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVI
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVIT
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVITY
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVITY
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVITY S
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVITY ST
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVITY STA
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVITY STAT
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVITY STATU
PUSHBUTTON
CALIBRATION
LED (YELLOW)
DETECTION
LED (GREEN)
CALIBRATION
L
EDS (RED)
SENSITIVITY STATUS
PUPPUSHPUSPUSHBUPUSHBPUSHBUTTOPUSHBUTPUSHBUTTPUSHBUTTONPUSHBUTTON
SE
PUSHBUTTON
S
PUSHBUTTON
SENSITIVITY
PUSHBUTTON
SEN
PUSHBUTTON
SENS
PUSHBUTTON
SENSI
PUSHBUTTON
SENSIT
PUSHBUTTON
SENSITI
PUSHBUTTON
SENSITIV
PUSHBUTTON
SENSITIVI
PUSHBUTTON
SENSITIVIT
PUSHBUTTON
SENSITIVITY
(RED)
PUSHBUTTON
SENSITIVITY
(
PUSHBUTTON
SENSITIVITY
(R
PUSHBUTTON
SENSITIVITY
(RE
PUSHBUTTON
SENSITIVITY
(RED
PUSHBUTTON
SENSITIVITY
(RED)
"YES" L
PUSHBUTTON
SENSITIVITY
(RED)
"
PUSHBUTTON
SENSITIVITY
(RED)
"Y
PUSHBUTTON
SENSITIVITY
(RED)
"YE
PUSHBUTTON
SENSITIVITY
(RED)
"YES
PUSHBUTTON
SENSITIVITY
(RED)
"YES"
PUSHBUTTON
SENSITIVITY
(RED)
"YES"
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESEN
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
P
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PR
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRES
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENC
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
A
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
MA
TERI
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
AT
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATER
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIA
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(G
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GR
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GRE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
" NO"
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"N
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO"
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" L
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESEN
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
P
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PR
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRES
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENC
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MA
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
M
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERI
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MAT
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATER
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIA
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MA
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
M
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERI
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MAT
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATER
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERIA
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERIAL
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERIAL
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERIAL
TEST
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERIAL
T
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERIAL
TE
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERIAL
TES
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERIAL
TEST
PUSHBUTTON
SENSITIVITY
(RED)
"YES" LED
PRESENCE
M
ATERIAL
(GREEN)
"NO" LED
PRESENCE
MATERIAL
MATERIAL
TEST
Sensitivity:
The sensitivity of the MK-2 relates to the amount of capacitance
(in excess of the calibration value) required to place the unit
into a detect mode. Materials with lower dielectric values will
require a lower numbered sensitivity setting for maximum sens-
ing capability. Materials with higher dielectric values allow for
a higher numbered sensitivity setting, which provides for an
additional level of build-up immunity. That is, sensitivity #1 is
most sensitive, while sensitivity #4 is least sensitive. The sen-
sitivity of the MK-2 is selected by pressing and releasing the
“SEN” push-button which causes the sensitivity level to
sequence to the next incremental setting. The current sensitiv-
ity setting is indicated by whichever sensitivity LED is illuminat-
ed, and correlates to the values shown in Figure 11.
Figure 11
Test Function:
The MK-2 features a unique test feature that is initiated by the
“
TST” push-button. This feature allows users to test the oper-
ation and installation of the unit by effectively placing a capac-
itance value, via the electronics, directly on the probe.
1) To activate the test feature, ensure the unit is calibrated
properly, indicated by the illuminated “CAL” LED, and that
the probe is not submerged in the material.
2) Press and hold the “TST” push-button. The unit will respond
by illuminating the “DET” LED when the sensing circuit of
the MK-2 unit is operating correctly. If push-button is held
long enough to time through the delay operation, the “OPR”
LED and output relay will activate as well. Failure of the
“DET” LED to illuminate indicates the MK-2 is out of calibra-
tion or that it is not sensing properly. Should this occur, con-
sult the troubleshooting section of this bulletin.
3) Releasing the “TST” push-button will remove the test
capacitance from the sensor and place the sensor into nor-
mal operating mode.
Delay:
This function provides a time delay from when the unit first
enters a detect mode, to when the relay output is activated. It
also acts in reverse, delaying the response from when the unit
enters a non-detect mode, to when the relay output is deacti-
vated. Clockwise rotation of the single-turn adjustment will
increase time delay from .25 to 15 seconds. The unit must
enter the new sense state (either material sensed or material
not sensed), and remain in that mode for the selected time
delay period, before the mode becomes active at the relay out-
put. If the sense state changes before the delay period
expires, the timing cycle will start over.
Fail-safe: (See Figure 12)
The term fail-safe refers to the output signal condition which
occurs with a loss of power to the probe. A switch permits
selection of either low or high fail-safe.
1) High Fail-Safe - The relay will de-energize when material
is sensed at high level or with power loss.
2) Low Fail-Safe - The relay will de-energize when material
is below low level or with power loss.
NOTE: The designations on the electronics label refer to the
relay contact status when no material is sensed and low fail-
safe is selected (Relay is de-energized). The designations are
reversed when no material is sensed and high fail-safe is
selected (Relay is energized).