MX Eco-touch Rotary Rack Gas Oven (FG166)
Rev. B21 21-05-21 MONO EQUIPMENT
25
8.0 GENERAL MAINTENANCE
To maintain the warranty conditions, the oven must undergo service at specific intervals. Below
is the service program with the given intervals:
Maintenance every 3 months
Lubrication:
Door lock – use heat-resistant grease
Maintenance every 12 months
Check/adjust:
Door lock mechanism
Internal door release mechanism
Lighting, including cables
Damper function
Drive belt tension
Limit positions
Water connection tightness
Solenoid valve operation
Rack hanger bearing
Function check
Chamber temperature calibration
Gas heated oven
Servicing of the gas burner, heat exchanger, and flue should be carried out at least once every
12 months by a suitably qualified person.
Lighting
If the lighting in the door fails to operate, contact the Mono Service Department.
It cannot be replaced by the user.
To Next Page
Loading...
