Do you have a question about the Monoprice 605999 and is the answer not in the manual?
Subwoofer type | Active subwoofer |
---|---|
Subwoofer peak power | 400 W |
Subwoofer sensitivity | 110 dB |
Subwoofer frequency range | 20 - 150 Hz |
Subwoofer driver diameter (imperial) | 10 \ |
XLR in | Yes |
Product color | Black |
AC input voltage | 100-240 V |
Power source type | AC |
AC input frequency | 50 - 60 Hz |
Subwoofer depth | 369 mm |
---|---|
Subwoofer width | 320 mm |
Subwoofer height | 381 mm |
Subwoofer weight | 15500 g |
Information on contacting Monoprice Customer Service for order, purchase, and delivery issues.
Inventory of included parts after receiving the product; contact for missing or damaged items.
Details the 10-inch fiberglass composite cone of the subwoofer unit.
Description of the removable grille protecting the driver from debris.
Construction details of the MDF cabinet with internal acoustic material for audio enhancement.
Details the 200-watt (RMS) amplifier providing crisp, clean, and distortion-free sound.
Explains the tuned port designed to enhance bass response for fuller sound.
Details the balanced signal inputs via XLR connectors and their pinout.
Describes balanced/unbalanced TRS or TS inputs and their pinout, noting override behavior.
Details balanced signal outputs via XLR connectors for frequencies above the low-pass filter.
Describes balanced/unbalanced TRS or TS outputs for frequencies above the low-pass filter.
Explanation of the volume control knob for adjusting audio loudness.
Details the low pass filter knob for controlling frequency cutoff for subwoofer and outputs.
Explains the phase switch for adjusting sound phase by 180 degrees for optimal listening.
Details the OFF/AUTO/ON switch for selecting subwoofer operation modes.
Explains connecting a foot switch to bypass the subwoofer and crossover for mix comparison.
Simple description of the switch to turn the subwoofer on and off.
Details the AC input jack for the power cable and replacement cord guidelines.
Explains the fuse holder and the type of fuse used for circuit protection.