Operation
25
MICROSEM
The Microsem is ground driven, and the
output set by means of a transmission which
is unaffected by a change in planting speed.
The Microsem system is mounted to the
toolbar frame to reduce weight on the planter
unit. Each Microsem hopper has an 18 lt.
capacity
Gearbox assembly
Microsem hopper assembly
Setting of the output = the output is a
function of the number of rotations of the
spindle of the metering boxes. The drive
system is a central drive system which is set
primarily with the double sprocket and the
interchangeable sprockets the Microsem
setting chart will assist with the setting and
also indicates the sprockets to be used.
Microsem hopper assembly
Microsem tube assembly
ATTENTION : Avoid moisture
contamination. This unit should be used
only with microgranulars and not with
powders or granulates. Agricultural
chemicals can be dangerous. Improper
use can result in injury to persons,
animals and soil. Handle with care and
follow instructions of chemical
manufacturer.
To Next Page
Loading...
