To Next PageTo Next Page
Need help?Do you have a question about the Monport CW-5200 Series and is the answer not in the manual?
Detailed instructions for filling the chiller tank with the correct water level using purified or distilled water.
Guide on how to properly connect water hoses between the chiller and the laser system.
Steps for initial power-up, including special startup mode activation and precautions.
Instructions for cleaning ventilation filters inside the doors to prevent overheating and malfunction.
Recommendation for regular water changes and daily visual checks for leaks and clarity.
Explains the benefits of Intelligent Mode for optimal Co2 tube temperature control within 2° of ambient.
Describes how the chiller warns of high room temperatures (E1 alarm) and how to resolve it.
Details warnings for low water temperature (E3 alarm) and the necessary corrective actions.
Explains warnings for high water temperature (E2 alarm) and how to stabilize the system.
Lists error codes for sensor failures (E4, E5) requiring factory service.
Identifies the red LED as a water flow alarm and troubleshooting steps for kinks or obstructions.
Advises against custom settings, highlighting risks to the laser tube and chiller.
Specifies the ideal ambient temperature range (15-25°C) for Co2 laser performance and longevity.
Clarifies the purpose of the aviation plug as an optional water flow sensor connector.
Troubleshooting steps for power issues, including checking connections, circuit breakers, and fuses.
Explains the red LED indicates a flow alarm; check water level and lines for obstructions.
Suggests removing the top cap to address slow water drainage issues.
General