QUICK START GUIDE
Thank you for purchasing Monster Digital
®
On-The-Go (OTG) Cloud
™
This Quick Start Guide will get you using OTG Cloud in no time.
PACKAGE CONTENTS:
1
Charging OTG Cloud
4
WIRELESS Access
2
Download App
3
WIRED Card and USB Access
Monster Digital
®
OTG Cloud Device
USB to micro
USB cable
microSD
SD Card
USB Flash Drive/
External Hard Drive
To Computer
Quick Start Guide
(you are reading it now)
MicroSD card + Adapter
(capacity/size may vary)
a. To charge faster turn the power switch
to the OFF position, away from the
power symbol .
While OTG Cloud is charging, on your
tablet or smart phone search for
“Monster Digital OTG Cloud” in the
App Store
SM
for iPhone
®
, iPad
®
and
iPod Touch
®
or Google Play
™
for
Android
™
and download the App.
Scan the QR Code below to access
the OTG Cloud App for iPhone, iPad,
iPod Touch and Android.
When OTG Cloud is turned OFF and
connected to a computer via USB it
can act as a card reader –Read and
write to SD cards, microSD cards and
USB storage devices like ash drives
and external hard drives. When turned
ON data transfer is via Wi-Fi only.
c. Plug the other end of the cable into a
charger or computer that is turned on.
b. Plug the USB cable into the
micro USB port on OTG Cloud.
d. When connected to a power source
the charging indicator will turn blue.
e. When turned o and plugged in,
the charging indicator on the
device will turn blue.
Color/Battery Charge Status
when OTG Cloud is on:
Blue
=
50
-
100% charge
Orange
=
20
-
50% charge
Red
=
0
-
20% charge
OFF
c
b
a. Aer charging OTG Cloud turn the power
switch on. When OTG Cloud is turned on,
Wi-Fi is enabled allowing wireless data
transfer between the storage plugged
into OTG Cloud and the devices
connected to OTG Cloud via Wi-Fi.
b. On the back of this guide is the factory
set SSID number for OTG Cloud. On your
phone, tablet or computer go to “settings”
and select “Wi-Fi”. From the available
networks choose that SSID, for example
AngryBacon234. Later we will show you
how to rename it.
THE FIRST TIME YOU ACCESS OTG CLOUD
FROM YOUR TABLET OR PHONE IT CAN
TAKE UP TO 60 SECONDS SO BE PATIENT!
By factory default you will be connected
to OTG Cloud as a router and are no longer
connected to the Internet. In the advanced
set up guide we will show you how to
connect to the internet through
OTG Cloud in Wi-Fi repeater mode.
c. Now that you are wirelessly connected
to OTG Cloud you can access the SD,
microSD and USB storage connected
to OTG Cloud via browser, app or
wireless drive enumeration.
By Browser – There are two ways to access
1. In any browser on any device type
http://10.10.1.1 into the address bar.
It’s easy to remember if you say it as
“ten-dot-ten, dot-one, dot-one”.
2. On a Windows
®
based device you
can type http://mdOTGCloud into
the address bar.
By App – Launch the app and you can
upload and download les to and
from your device to the storage
connected to OTG Cloud.
By Wireless Enumeration – Storage
connected to OTG Cloud will appear
as a network drive on a Mac or PC.
Files can be opened, moved, copied
and deleted as if the drive is attached.
(
This is really cool because many
other wireless devices don’t do it.
)
BEFORE YOU BEGIN! CHARGE OTG Cloud – OTG Cloud may have some charge
on the battery but we recommend you fully charge it before you begin using it. 1000mA
charging source is best. OTG Cloud will charge faster when turned o. See instructions below.
To Next Page
Need help?
General