8
STEP 4 Over- and under-voltage automatic shutdown setting
This feature allows you to enable or disable the automatic shutdown feature for abnormal line voltage. When
setting at “enable”, the unit will shutdown itself when the line voltage is higher than 134V or lower than 96V.
A) Press “MENU” until the displays show:
B) Press “SET” to toggle between “enable” and “disable”.
MANUL_HTPS_7000_Q3bn.indd Main:16MANUL_HTPS_7000_Q3bn.indd Main:16 4/4/06 3:08:21 PM4/4/06 3:08:21 PM
To Next Page
Loading...
